Community

I know there is a related topic with the same problem but that one is for version 5.0.0 There is a known problem with Windows 11 and the installation of Microsoft SQL Server where the engine will not install unless it is installed on a different drive or VHD.I understand Veeam Agent for Windows uses SQL Server technology which is probably why it fails to install.Question 1: Is Veeam working on a solution independent of Microsoft?Question 2: I installed SQL Server 2019 Express with support for local DB but Veeam Agent for Windows still fails. Is there any way to have Veeam use the existing (operational) engine instead of attempting to install its own SQL engine? I read somewhere that they are using SQL 2012 but I haven’t tried preinstalling that version.Question 3: Is there any way to trick Veeam into installing on a different

HelloHope you're all doing well these days.I work for a company in Spain and I would like to ask you about an issue I’m facing with archive offload to AWS S3 storage.We are currently performing backups on a capacity tier (AWS S3) without issues but archive tier offload is failing. Here is what the proxy appliance log says:[...]02.12.2021 15:02:46] <43> Info         [Ssh] Granados '617c81c8-8c61-404a-86c0-1f00ecf6ee18' connected to . Session: [SSH Session; Local: ; Remote: ][02.12.2021 15:02:46] <43> Info         [Ssh] Connected to x.x.x.x while other addresses () are unavailable.[02.12.2021 15:03:07] <43> Error        Failed to connect by SSH. RetryCount: '0'. MaxRetryCount: '10'.[02.12.2021 15:03:07] <43> Error        Failed to login to host: 'x.x.x.x', port: 2500, elevation to root: 'no', autoSudo: no, use su if sudo fails: no, host name: , IPs: [x.x.x.x], AuthenticationData: [UserName: ubuntu,

If anyone is looking for version numbers Veeam has now updated the KB site with the newest CU patches noted in my previous post.  Just in case you want to know what version you are on. 

Hi folks, recently some KBs were pulled out.This is last one, and very helpful to anyone is having fun with Windows 11.Veeam Agent for Microsoft Windows can't be started or installed after upgrade to Windows 11https://www.veeam.com/kb4259There’s already a topic about this (thanks @Chris.Childerhose): But I wanna share some more info about it, and maybe talks about Windows 11 and if it’s ready to production. I say no.Apparently there’s a problem with MS SQL LocalDB instance that can’t start automatically if system disk sector size greater than 4 KB.There’s even a Docs by Microsoft for this:

Hi, I am backing up VM’s from single ESXI server. At present I have 2 VM and backup runs daily. I notice one VM backup has RED Flag/Play sign.What does it mean, anything to be worried of ? Where can I get read all of the ICON details ?  Thank you. Dwija

Twas a few days before Christmas and Veeam decided the sysadmins around the world had been good all year long, they’d tested their backups, met their RPOs and had earned an early gift. So Veeam released the Veeam Agent for Windows & Veeam Agent for Linux 5.0.2.Veeam Agent for Windows Download LinkVeeam Agent for Windows 5.0.2 Release NotesVeeam Agent for Linux Download Links

Hello,I’m wondering what are you using for hardening Operating System?In my company we’re using:https://www.open-scap.org/ for Linux with profils from french cybersecurity agencyhttps://docs.microsoft.com/fr-fr/windows/security/threat-protection/security-compliance-toolkit-10 for WindowsI am convinced that hardening should be mandatory in production, don’t be afraid to deploy it with your images. It works very well for Veeam Servers.PS: You should never deploy the hardening after deploying the app, you could meet horrible bugs.

Veeam released a new Cumulative Patch for Veeam Backup & Replication 11a: 11.0.1.1261 P20211211Includes a lot of new platform support and a few fixes. See detailed release notes:https://www.veeam.com/kb4245

The new version of Kasten K10 (4.5.6) supports now to store persistent volumes images into VBR repositories. So, the integration of K10 and VBR gets on a new level...There are some requirements to get this working. See the new KB article for further information.https://www.veeam.com/kb4258

Hi guys, I have a query. I am planning to upgrade from v9.5 to v11, the current license which I am using in v9.5, can i use the same in v11. And please don't reply with a link which leads to upgrade to v11 which I have already read and I have a confusion which is why I am asking. 

Merry christmas to all Veeam community members and all you love and care for. Have some nice and quiet holidays.A happy and good year 2022 to all of us. 🎄 

Hi guys,I have a query. When configuring a replication job, we specify a repo to store replica metadata. Where is the replica metadata repo located? in source or target site?

A little help would be appreciatedWe have old VMs (Debian 8) which replicates without problems.But the replication on new VMs (Debian 9) is corrupted, half of the services like SSH or UFW no longer open.The only difference is that the old VMs are Thick and the new ones are Thin.Is it possible that VEEAM Free does not support Thin VM replication? If yes, what can I do?

Good evening folks,got a question for you, hopefully the last one before Christmas, for an “issue” I’ve got with Veeam.B&R has a job that backups a list of vms, and that’s all good.Then I add a vCenter in the structure, and vCenter updates all nodes’ certificate.Ok.At this point, B&R Console needs a refresh and it’ll see all vms as new ones.Perfect, but.Next backup Veeam will save them as full backup, creating a duplicate of the vm in the backup file.Is there any way to avoid it?

Hi all, I am using Veaam Agent on a pc with only one hard drive which has two operating systems (W 11 + Ubuntu 20.04).Is it possible to create a job to backup the complete hard disk (W11 + Ubuntu + Boot partition)?Thank you

Here’s a sample PowerShell script to identify Cloud Connect backups that are no longer tied to an active Backup Job. It also includes functionality to only show restore points older than XX days.Further background info on this script... When a Copy Job (or Backup Job) is deleted that was sending its backups to a (Cloud Connect) Cloud Repository, the backup files are not deleted by default. This behavior is great as it enables a backup administrator to hold on to the backups according to their company's retention policy. Sometimes, though, these backups are forgotten which results in additional storage consumed in the Cloud Repository which translates to higher storage costs. This script provides an automated method of identifying these backups so they aren't forgotten.NOTE: This script is designed to be executed on a Veeam Backup & Replication server that sends backups to a Cloud Repository. It will not work if executed on a Cloud Connect server.

Hi All,Recently I configure a schedule backup to Tap Drive one of my customer environment. Now customer wants to know that, if tap cartridge is changed then schedule backup is working or not.i think that is tap cartridge full and change the cartridge then its need to be take full backup again first then can continue the schedule backup.any suggestion on that pls.

Hi Everyone, Vulnerabilities wait for no-one, so whilst some are enjoying a weekend off, others are patching to protect against the latest risk. Log4j. This post has two objectives. Firstly I’m sharing my write up regarding the issues I’m aware DO have an impact to VMware, secondly what does this mean to the Veeam products… First up: VMwareI don’t often dedicate a blog post to a particular security vulnerability, but since it has scored a perfect 10 CVE rating, it’s important to be aware ASAP.VMware have identified multiple products that utilise the Apache technology that are vulnerable to the Log4j vulnerability. What is this “Log4j” vulnerability?A Remote Code Execution (RCE) has been discovered in Apache’s Log4j Java Library. It is possible to insert maliciously crafted strings into fields that will be logged, which then leverages the “message lookup substitution” func

Hi, I don’t know if anyone else was aware but @haslund highlighted to me today that the new VMCE 2021 exam is now available for everyone looking to take/upgrade! Information on the training course is available hereInformation on the certification is available here FAQs:Do I need to attend the training course before taking the exam?If you don’t hold a valid VMCE 2020 certification, it is mandatory.If you do have a VMCE 2020 certification, it is recommended but not required.The one exception is if you took the VMCE 2020 class within the last year but have not passed the exam, you can take the VMCE 2021 exam until

Hi guys, I’ve been busy on a rainy cold evening: https://www.linkedin.com/feed/update/urn:li:activity:6877314027693969408/ cost: some green balls and 2 led light-strips on 3v and then plenty of Veeam-goodies that were somewhat everywhere in the house and at our office :-)… and most important: a set of steel nerves to temper the kids while lighting up all those pens in a tree full of very breakable balls...result: priceless Feel free to use, re-use, ab-use the below pics in your own message on social media.

I had to do a quick backup of a VM today.OK, no problem I thought and hit the Quick backup menue topic for this VM in the inventory tabThe job started and I saw some disk exclusion in the job log.Mhh… I wanted a quick backup of the whole machine.Then I saw that another job than I had expected was started for the quick backup.OK, this job backups indeed on disk of the VM only….Then I recognized that this VM is associated to several backup jobs. One which backups the whole VM, one to backup one VMDK with DB Backups and on job to backup one VMD

Happy Friday! Decided to post this early in the day this time. As per the subject, what is your favourite feature Veeam have ever introduced? This can be across any Veeam product and from any version! For me, it has to be SureBackup. The ability to automate backup validation takes you from “it should work” to “it WILL work”. And you can’t put a price on the amount of sleep I never lost from worrying about the backups 😉

How are you naming your backup repositories (or extents in SOBR) today?