Discussion Boards

I've just discovered this tweet from Nutanix. As we also have community members who work with Nutanix I thought it was worth to be shared here.  So if you were targeting for a Nutanix certification, then why not write it this weekend.

Following on from the excellent advice on what kind of storage server (and direct attached storage within) to use for a hardened Linux repository, may I push my luck to ask for some more advise or where to go next. Presuming I can get my hands on a suitable storage server and storage (as recommended) could anyone shed some light on how we’d need to set this up so that Veeam is able to back up the data on our Infortrend SAN. Here’s some further details of our config.We have a Windows server in our (remote) data centre that is running Veeam B&R v11. It is currently just making some physical backups of critical Windows and Linux hosts. These hosts are physically located in our office and there is a decent enough secure connection to make these backups over the line to the Veeam server in the data centre.However, I want to expand our use of Veeam to make regular backups of the TB’s of data on our Infortrend SAN which is also based in our office and this i

If you use vSAN in your environment and have VONE v10/v10a installed the API calls could cause performance degradation in your environment.  See the KB - KB4234:Veeam ONE version 10/10a impact on VMware vSAN 

Veeam has published an updated list of supported vSphere versions.  Check it out here - KB2443: Veeam Backup & Replication support for VMware vSphere

Veeam released a new Cumulative Patch for VBO365 5d.If you are a service provider and you are using VBO365 for doing backups of your customers to an object storage, please install the patch immediately. Without the patch, under specific conditions, there could be a data loss. You can find out more under the following kb article: https://www.veeam.com/kb4222

Hi, We have a lot of backup copy jobs (but far from all) that fails with the error “Failed to dispatch repository file session resource requst. Requested amount of file session (193) is greater than the maximum amount available (192).According to HPE Veeam should know that this StoreOnce has a internal limit of 192 datastreams and should not try to open number 193.  Anyone with a idea of how to fix this?

For those that use a NAS for backups if you happen to have the Recycle Bin turned on for the NAS share you might want to read this article just out from Veeam on potential issues.KB4230: NAS Recycle Bin impact on Veeam Backup & Replication Repositories

We have provisioned VBR in production, tecnically with compute and storage. Can we replicate the recovery points from prod VBR to VBR dr? In dr, we will provion as well VBR dr resources.  upon checking with veeam, they can replicate in the dr but the source is the vcenter prod as well, meaning 1vbr is enough as long as they vcenter in dr. Thanks

VMware has released an update to fix the thin provisioning issue and PSOD of hosts. See here https://docs.vmware.com/en/VMware-vSphere/7.0/rn/vsphere-esxi-70u3a-release-notes.html#resolvedissuesThis issue - https://community.veeam.com/discussion-boards-66/heads-up-do-not-update-to-vsphere-7-u3-when-running-thin-provisioned-vmdks-1625 

A bad bug was found in VMware vSphere 7 U3. A ESXi host may crashes with a PSOD when running thin-provisioned VMDKs. Currently there is not solution available. There are a few workarounds but no easy ones:Downgrade to older version, Convert all VMs (VMDKs) to Thick-provisioned, Disable TRIM/UNMAP in Guest OS.For more information see official VMware KB: https://kb.vmware.com/s/article/86100@jorge.delacruz  already posed about the issue: https://jorgedelacruz.uk/2021/10/22/vmware-psod-after-updating-to-vsphere-esxi-7-0-update-3-panic-requested-by-another-pcpu-thin-provisioned-

Hey everyone! Happy Friday! Today I’d like to create a safe space for people to vent, and maybe learn! What’s that one thing you see in your Veeam deployments that you just love to hate? As it’s Cyber Security Awareness Month, mine is definitely Cyber Security themed:For me, it has to be passwords that are so weak, it was barely worth using them! I’m talking the typical dictionary attacks, variations on the word “Password” or “Admin” etc. Fun Side Story:I once worked with a company that decided to have their RDS server pointing out to the internet ( ), they had a domain admin leave and instead of disabling the account, they reset the password to check over the account! And what did they set this key account’s password to? “Password1”. They got ransomware’d in under 20 minutes. Thankf

Hi there. Need help with backup Windows machine to Synology via SMB. I create user with password on my Synology, create a shared folder on my Synology.Than i create New backup job in Veeam Agent. After i complete all fields (i passed a check pair user/password), i receive error (on screenshot). I tried connect shared folder on Syno to Windows machine - it's ok. One more thing, when i push the "Apply" button in New backup job, in the shared folder created file and delete after half second. What i do wrong?I translate the error: "The filename, directory name, or volume label syntax is incorrect. (Exception from HRESULT: 0x8007007B)"

If I were to create a new copyjob to replace an old one, and I want it to only move over the very latest restore point and none of the previous restore points that are currently in the repository; can this be accomplished by taking a new active full on the source jobs and then running a sync now on the new copyjob and telling it copy over the latest? If not, can this only be accomplished by wiping out all current local and cloud and starting from scratch?

I am more than excited to announce today that I was selected from the raffle as a winner of this amazing prize. Basically I love kicks and this will be my regular henceforth.My enthusiasm go make me to use this shoe almost every day eeehn (Naija pidgin) . Special thanks to @Kseniya and @Rick Vanover for this special opportunity as a Veeam Legend. I am grateful once again.This bring me to the question @Rick Vanover, how can Veeam maximise my sites? I love to even showcase Veeam more and more on my site. I get thousand of visitors and viewers around the world each day, and I want Veeam to leverage on this. 

Hey community, can we perform replication job of agent based backups?

We have VMware private cloud, consists of different VMs for different customers, technically is has 1 center. We have a separate infra of backup, with them as a backup solution, different Veeam instances as well for different customers,Now we have ongoing project for backup and provisioned veeam instance1  we will connect to the vcenter of our vmware private cloud and assuming it will be successful, moving forward for veeam instance2 3,4, and so on and we will use as well the existing vcenter for different instances. Is there any problem or error since Veeam instance1 already connected to the existing center? Then definitely we will connect other Veeam instances2, 3,4… Thanks

For those of you who have upgraded to 11a, how are you liking it so far? I upgraded all of my servers last week and so far I can 100% see a big difference in performance. I am happy with it so far. I also updated our Service Provider Console to v6.

I run Veeam B&R 11 on a Windows server but at the moment it is just making some physical backups of a number of critical Windows hosts and a few EXT4 volumes on Linux hosts.The majority of our data (give or take 125TB) is hosted on a SAN (mirrored) exposed as EXT4 volumes via iSCSI on a Linux server.As an extra level of backup, I want to start backing up this data on a regular basis with Veeam B&R 11 onto a new suitable storage server with sufficient Direct-Attached Storage or some kind of NAS unit, preferably with this storage configured as a hardened Linux repository in Veeam.This storage server would be in a different location to the SAN, but connected over a 10GBE link.Has anyone got some advice on what would be a good hardware solution for this Linux-based hardened repo?Should I be looking at one of the larger Synology NAS units with sufficient capacity (not sure if this can be used with Veeam as a Linux repo or would a dedicated serve

Hi everyone, Today VMware have announced the 7.0 U3 release for VMware vSphere and Update 3 for vSAN 7.Announcing vSphere 7 Update 3 - VMware vSphere BlogAnnouncing vSAN 7 Update 3 | VMware Virtual Blocks Just to remind everyone that v11a is going to be the minimum required version for this as per the release notes:VMware vSphere 7.0 U3 readiness based on the pre-release build. The official support will require full regression testing of the GA build when it

Hi everyone, i’ve been having this problem for a while now…Email notifications after backup completion are not being sent anymore to the specified email address, but when i test the credentials the email arrives successfully to my email account. I’m using the Veeam Agent 5.0 on a windows server 2012 r2. No veeam B&R is implied, just the agent making backups to a local disk.Additional informations:i recently changed the email server for the email account, before changing it everything was fine and the backup emails arrived, so at a first glance it seemed a problem with the email server; but i made a clean installation of veeam agent 5.0 on another server, using the same credentials, and the emails for the backup job are arriving regularly; so this excludes the fact that it may be a problem of the new email server(and also the fact that the email tests arrive without any problem).So i thought this may be a problem related to some veeam files regarding t

Hello Techies,We use Veeam Backup as our backup solution, and I am planning to configure Veeam as follows to make sure that our data are safe during a primary site unrecoverable disaster.Regularly backup configuration and keep it external storage source ( One Drive, external HDD ..etc )  At the end of each backup, I will configure a copy job to secondary storage  The secondary storage will be mapped from the DR site using the site-to-site link.So, after each job, a copy will be placed into secondary storage and the secondary store will be on the DR site. In the event of primary site unrecoverable disaster, I will perform as follows 1- Install fresh Veeam software 2- Restore configuration3- Map secondary storage backup LUN / Volume 4- Restore from secondary storage Am I missing something? any suggestion? 

While  creating backups in a Hyper-V environment, you need several permissions to be able to properly snapshot and process a VM. What are the  permissions are not necessary for on-host backups, if used?Full Access permission on the targetfolder and share access given. 

Hi guys One of our customer hosts VBO on a Azure VM with managed disk as backup repository. Not the best practice and most cost efficient, but customer started with VBO v2 :)To the problem: Customer tries to restore a sharepoint site of 50GB with many files. The restore performance is quite bad around 3MB/s with bottleneck shown as source.Are we hitting against Microsoft limitation? CPU and disk on VBO VM is low during the hole restore time. Also tried with SSD as managed disk without any effect. SincerelyDaniel 

hi team can any you explain me where the veeam Credentials is store? if it's store in the sql database is the Credentials is encrypted? is it possible to recover Credentials from sql database? 

as v9 only ntfs is supoorting bitlooker? any update in V11 or not.