Discussion Boards

Anyone that uses VMware might want to check this out as they just release Update 2c for version 7.VMware ESXi 7.0 Update 2c Release NotesVMware vCenter Server 7.0 Update 2c Release NotesThis includes both vCenter and ESXi.

Do you have any questions about achieving or upgrading any VMCE certifications? Ask and you’ll get an answer

Hi, everyone I have some copyjobs that have been running for a significant amount of time due to a catchup-scenario we are in. I have noticed that on some of the jobs, it seems as if they start over. I check the jobs at some point the next day, and instead of the “Last Run” column showing days, I will see 8 hours ago, 3 hours ago, etc. The job will still be in running status. But it also looks like the job may not have started over. These jobs are immediate copy.

For those who don’t go to the VMware forums (another ‘communities’ based vendor website) often, there was finally a VMware employee who somewhat unofficially acknowledged the issue of running ESXi on SD cards, specifically with vSphere 7U2. I say U2 because v7 and v7U1c, of which I both have run on DELL IDSDMs, runs flawlessly; and has for the past year.To read a little more on the issue, you can review the VMware Communities post here. The issue, it seems, has to do with their newly formatted boot partitions. But honestly, I think the mishap (Hosts disconnecting/hanging) is mostly due to a new vmkusb driver. VMW is currently working on a fix, though they’re really recommending orgs to start using ‘high-performance’ storage (i.e. disks) for the boot  device moving forward. All that to say is, if you haven’t upgrade to 7U2, I recommend not to. If you’re running your boot on disk, I think you’ll be fine. Otherwise, hold off. One of the Veeam Vanguards, Luciano Patrao, did a nice little p

Hello, I currently use Veeam Agentfor Microsoft Windows Free to back up my Windows 10 computers to NAS.  I want to upgrade to a solution that can do the following1. Back up Windows 10 computers to NAS2. Back up network drive to NAS (network drive is 2TB USB drive connected to home router)3. Back up Android devices to NASDoes Veeam offer a product that covers all these requirements?Thank you!

Afternoon everyone, I’ve just seen that Veeam have released the new version of Veeam Backup for GCP! Release Notes: https://www.veeam.com/veeam_backup_gcp_2_0_release_notes_rn.pdfWhat’s new:https://www.veeam.com/veeam_backup_gcp_2_0_whats_new_wn.pdf A key highlight is GCP will be joining AWS & Azure native backup options in being managed by Veeam B&R v11a when that becomes available!

I ran a report in Veeam and found out that there were several garbage files in Veeam. But, we have CISCO UCS sentinal snapshots. Do you think that what Veeam shows in Garbage files could include the Sentinel Snapshots also? As, we do not want to delete the Sentinel snapshots in UCS which might be appearing as Garbage files in Veeam. Anyone could explain more about this Garbage file and which one we should delete.

FROM THE DESK OF RICKATRONI hope everyone enjoyed the VeeamON 2021 online event. Now the real work begins for us. How to we incorporate a real event with the online experience. We can’t say no to the great reach of the online world yet much of the market wants the real event for a more authentic experience.My question for you is what would we do better at a subsequent online event format?Keep the suggestions as constructive as you can please!BONUS:  Help us steer our presence at VMworld and AWS with this survey! Tell us the experience you want!

Hello, I would like to try the immutable backup functionality of V11. A first trial was successful but I would like to continue. The repository machine is an older desktop PC where I have installed 4 x 1TB SATA HDD. How do I have to  configure the initial configuration script of Ubuntu in order to realize a 100GB RAID10 for the OS and the remaining space as RAID10 for the backup files? BRFrank

Hey Guys,I have query. Suppose I have my veeam backup server on-premise and if I wanna store my backups on a repository(let’s say windows or linux) on cloud. Is it possible to integrate on-premise backup server with repository on cloud?

Has anyone tried registering for the VMCE 2021 using a surface pro? Mine was temporarily goosed after the Pearson Vue test, and the mouse performance was terrible.

Require some clarification on Veeam Rental licensing.  Do rental licenses follow the same offering as the Veeam Universal License (VUL) offering listed in the Veeam Licensing Policy? Meaning, for every 1 license of Veeam Backup & Replication, they are offered in packs of 10 instances? We report per workload type (VM, Workstation) on a monthly basis to our aggregator.  With that said, does that mean it’s a 1:1 ratio for rental licenses? for every protected workload you have to license per unit (VM, Server, Workstation).Generally a little confused with the different offerings between commercial and rental, and whether rental licenses follow the VUL offering.

Hello Veeam Community, If customer have 500gb left in their datastore, how can I know or compute If how many days/months the 500gb will be? Assuming the daily trend average backup size is 900gb definitely it will reduce since there is dedup and compress in Veeam and have forever incremental sched. Thanks

Hi,Can anyone confirm if .NET 4.8 can safely be used with Veeam B&R 11?I need to install an agent on the host server and .NET 4.8 is a requirement. I cannot get a definitive answer from our 3rd party vendor who just refer me back to the System Requirements. Thank you

Veeam has introduced yet another plugin for storage so anyone that uses HPE XP8 can find the KB here - KB4194: Release Notes for HPE XP Plug-In for Veeam Backup & Replication 1.0.66As per Gostev’s digest it uses the Hitachi SVP engine so it was easy for them to add support -Last week we've shipped yet another Universal Storage API plug-in, this time it is for HPE XP8 storage. This storage model uses the Hitachi VSP engine underneath, so it was easy for us to quickly add support after we integrated with the latter. For the release notes, please refer to KB4194.Check it out! 

Hello everyone,I Have been learning about veeam products and recently for practice, I  setup a windows server VM  & installed veeam backup & replication in that. I was trying to backup a physical machine and the backup job failed. I feel the reason is  veeam is not able to identify details such as hostname and credentials. I looked various documents related to this but still I am missing out something. I even installed veeam agent on physical machine during initial setup. Can anyone help me out with this?

Hi all,from Gostev's Veeam R&D Forums Digest, report a new threat targeting ESXi hostsSecure your VMware ESXi hosts against ransomware in 3 simple steps! (truesec.com) Linux version of HelloKitty ransomware targets VMware ESXi servers (bleepingcomputer.com)

Hey All, Our Synology no longer supports NTLMv1 which is causing the Veeam SMB Repo to disconnect. Anyone know of a way to set the SMB level in Veeam to 2 or higher minimum? Thanks. User [veeam] from [IP address] failed to log in via [SMB] due to [NTLMv1 not permitted].

If you are wondering about support for VMware v7 U2 well check out this link as it shows that Veeam v11 is now officially supported.VMware Compatibility Guide - vsanps

@wolff.mateus asked what Brazil community thinks about latest Gartner Report for Magic Quadrant for Enterprise Backup and Recovery Software Solutions. I think this is interesting globally as well!According to Gartner, Veeam is about 1 cm (or inch, if you prefer) behind the leader in Vision  Honestly I have no deep knowledge about other competitors. So I looked at Veeam’s Strengths and Cautions. Strengths:Instant recovery True! More and more workloads are adding to this feature. Like Database and NAS in v11. Cloud cost transparency Yes, with Build-in cost estimation. Like for Veeam Backup for AWS 3.0 Technical support Customers are very satisfied with support. I personally too. What is not mentions is the satisfaction level of the software quality, which is also extremely high.Cautions:Deployment complexity In large-scale environments, this can happen. Veeam roles can be distributed over a lot of Windows/Linux servers which can be physical or virtual. Veeam does a good job in distributi

As you know, July 30th, the official day for all IT professionals across the globe — System Administrator Appreciation Day aka SysAdmin Day!It is celebrated on the last Friday in July to show appreciation for the work of Sysadmins and other IT workers. I always say, that here at Veeam we take community seriously and we want to share this day with you, as we truly appreciate SysAdmins’ diligent work and dedication.Join us for a panel discussion, where I and @Rick Vanover will be interviewing @Geoff Burke and @coolsport00 about their SysAdmin journey, mistakes that changed their path, lessons learnt, and of course, SysAdmins’ pieces of advice for today and tomorrow. I look forward to this event and I bet there will be some funny stories shared too  Join us on July 30th, at 1 p.m. ET/12 p.m. CEST/1 p.m. AEST!Registration is open: https://go.veeam.com/webinar-sys-admin-day-event   

Hello, I would like to know what is the best design for Simple and Advanced.For Simple, I have 1 server with the veeam backup, proxy and storage. For Advanced, I have compute as veeam backup and a third party storage. if customer have 16tb source backup, (1) what will be the best design to position, have a Simple to lower the cost or position a Advanced Deploy since date is 16tb?(2) For Simple, what will be the basis to position the Simple Deployment? atleast 5tb and 10 jobs? or how many jobs or source data, so we can consider that as Simple?(3)For Advanced as well, how many jobs or source data? I am reading the article below. Thankshttps://helpcenter.veeam.com/docs/backup/vsphere/deployment_scenarios.html?ver=110https://bp.veeam.com/vbr/

Hello,We have a VBR 10 with Enterprise Manager in a physical Windows Server 2012 R2. Also we have a secondary VBR 10 in a virtual machine 2012R2 in an external site.I have to migrate all the products to version 11 and I would like to know what is the best way to backup all the configuration necessary to restore the servers in case of problem.I read that I have to perform backup of the SQL Server configuration databases used by Veeam backup servers and Veeam Backup Enterprise Manager server, to easily go back to a previous version in case of issues with upgrade. So, In case of problem, I can go back to a previous version with the built-in configuration backup and the SQL Server configuration databases backup, right?it’s also another option to do a Veeam Windows Agent Backup of that physical server from the other VBR in the external site?Thanks in advance, Omar De Souza.

Happy SysAdmin Day, community! First of all, come and join us today for the celebration of SysAdmin Appreciation Day with @Rick Vanover, @Geoff Burke and @coolsport00! It’s gonna be fun!  Second, I bet you noticed a new special header banner here in Community Hub!It’s special indeed and has Easter eggs in it with some discrepancies and even practices that you don’t want to repeat! Will you find them all? Let’s give it a try!   

Hello y’all! I’d like to know what software or tools you often use to project and draw your Veeam environments.Do you use MS Visio, LucidChart or something else?