Community

Today’s #VMCE2020 #DailyQuiz walkthrough is ready. How are you monitoring if RPO is being acheived today? What about RTO? Regular restore tests?Try this question and more at https://rasmushaslund.com/vmce-practice-exam/

Applicability and efficiency of each transport mode primarily depends on the type of datastore used by the source host — local or shared, and on the backup proxy type — physical or virtual. The table below shows recommendations for installing the backup proxy, depending on the storage type and desired transport mode.which one do you use?                                                                                                             

Today’s #VMCE2020 #DailyQuiz walkthrough is ready. How proficient are you with the replication process on Hyper-V or vSphere? What is done by the source and target data movers?Try this question and more at https://rasmushaslund.com/vmce-practice-exam/

If you love a great technical presentation (with a lot of whiteboarding!) then don’t miss out this session by @jorge.delacruz and Alex Fraser on pros and cons of different backup strategies. 

I’d like to spread the word about this new program among my team and my larger network. Are there plans in place to have some form of a ‘referral’ function, whereby I can send invites out?I could see it being both a way to build membership, and also incentivize deeper engagement in the members who’ve already joined this community.Just a thought/suggestion, take it or leave it.

In this week's episode of #HomelabWednesdays, I show how to see if any updates are available for your VMware vCenter Server and how to install the updates using the vSphere Appliance Management Interface (VAMI).Don’t forget to subscribe to get automatic notifications whenever a new video is released. 

    I used to use Veeam since late 2014, I always try to find some ways to enhance my usage. Here are some features I thought might be interested if added in the future releases:1- SureBackup: SureBackup is one of the features made me choose Veeam in the first place. But while configuring it, I found that I need to choose specific VM to work on specific host. I thought that it will be good if SureBackup went cluster-aware to choose VM and host randomly every time it runs.2- Proxies:Once I started to backup VMs located on vSAN storage, I was told to use proxy server to work as a virtual appliance in order to complete a successful backup job without "doubling" the size. However, I needed to create a proxy on each and every host on my cluster. Now Veeam supports linux proxies but the problem with me that the number of proxies on my cluster as my environment expands.Is there any way in the future to use a single or couple of proxies to work with all cluster? 

This is going to be a quick post on how to backup a single OneDrive folder with Veeam Backup for Office 365.One of my customers developed an internal policy regarding the usage of OneDrive for Business.The policy is, that each user has a specific “Work” folder (root folder) which gets backed up with Veeam Backup for Office 365. All other folders are not backed up and the users do know that. So in this scenario we needed a OneDrive backup job, which backs up the whole organization with the OneDrive object and only includes that work folder.By the way, you are also able to exclude specific OneDrive folders by using the “-ExcludedOneDriveFolders” variable.However, in my case here it makes more sense to only include that specific folder.The scenarioI recreated that scenario with my own Office 365 Tenant, whereby I selected to only backup my webhosting folder. If you didn’t know it already, the ability to exclude or include specific folders for OneDrive backups is only available by using Po

Today’s #VMCE2020 #DailyQuiz walkthrough is ready. Have you been in a legal situation that demanded an export of a specific point in time of your backups to ensure data is not compromised or lost? How did you handle it? 

Hi Veeam Community, Please let us know what topics you want covered in Veeam University training? 

Did you know you can easily schedule your disaster recovery tests to run with Veeam Availability Orchestrator?Orchestrator’s Lab Calendar makes it simple to run a DR test on a scheduled basis whenever you want - like on #DRTestTuesday.The best part of course, is being able to provide a copy of a production environment to your application owners when after the test has run.Just think of what you can do with a copy of your data - test patches and application upgrades, train new staff members, and do all of the testing you would never want to do in a live environment.Be sure to check out how easy it is to do right in the Orchestrator documentation.If you’re looking for the ultimate deep dive on everything testing (including running a DR test on demand and scheduling one in the Lab Calendar) in Orchestrator, don’t miss this great webinar which is nearly 100% demo (no boring PowerPoints from me!) and tackles Orchestrator’s amazing dynamic documentation as well.  As part of every DR test you

Is there any future vision to automate the remediation workflow right from VeeamOne?

 Throughout these years, I have been to many talks and events of Veeam, I have given many VMCE courses, and a lot has happened to me on this side in South America, the customers did not use Surebackup or Surereplica, they have told me that they did not know that they could use it, among other answers. And I think it is one of the most important features that Veeam has . Has it happened to you? I would like to read them  … 

I just read @Gostev ‘s R&D Forums Digest. He talks about LTO9 support in Veeam and new tape-features in v11 like tape cloning.So I thought it could be interesting to read about the changed/adjusted LTO roadmap:https://blocksandfiles.com/2020/09/10/lto-changes-tape-roadmap-strategy-cuts-capacity-to-build-air-gapped-ransomware-defence-storage/For short: LTO does not provide double-sizing its capacity from generation to generation any more. Also speed does not scale that much from now on.

There’s been some awesome content announced today. From Microsoft Teams support to the love for Linux in Veeam B&R v11. What stole the show for you? I’ll start, this little hint on the v11 page: Looks like we’re finally going to see CDP hit production!

Today’s #VMCE2020 #DailyQuiz walkthrough is ready. Are you protecting transaction logs? Do you push out the runtime from your backup server or a guest interaction proxy? Do you make copies of your transaction logs to a secondary location? 

Join me on November 20th at 12pm GMT | 1pm CET to learn everything you need to protect your backups against ransomware, just 15 minutes, tapas size. Hope to see you all there! https://go.veeam.com/chalkboard-war-against-ransomwareLooking forward to see you all there :)

Hey, Don’t know about you guys but I feel Veeam are missing what could be a very successful trick here with their SureBackup and Pre/Post Processing script functionalities. I know we have VeeamHub for some PowerShell scripts but I think to really push the value of Veeam integrating into our customers’ enterprise application stacks it would be great to have a more direct interface of getting scripts into Veeam. I’ve seen plenty of systems integrating “stores” or other web fronts to enable simple access. It’d be great to see ways of integrating with systems that have been seen as “traditionally” unfriendly to snapshoting and also to validate more complex workloads.I’m sure there are plenty of great scripts out there that just aren’t being shared due to lack of visibility of the existing platforms but driving it into the client would really improve feature take up. That’s my opinion anyway, how do you all feel about this? Wouldn’t you like vendors to be able to offer a one click “it just

Today’s #VMCE2020 #DailyQuiz walkthrough is ready. Are you making backup copies? How did you determine what your operational restore window is/should be? What is the oldest backup you had to restore from? 

Register here: https://go.veeam.com/veeamlive-enThe agenda looks amazing, but you definitely do not want to miss out on these sessions:Customer panel — Your Journey to the Cloud & Data Strategy (I personally love hearing real stories from real customers) Veeam v11: Top 11 hottest NEW features Can recommend signing up for v11 news here Some hints of what may be presented in this thread by @MicoolPaul  Cybersecurity Strategies for the Modern Era (presented by the always amazing @Rick Vanover and Europes #1 ethical hacker: Jamie WoodruffDo note, at the top there are different languages available which contain some variances in which sessions are available. The languages available are : English, French, German, Italian, Spanish and Russian. One of the classic presentations by Jamie Woodruff: 

Give some thoughts to the interval of a report. Current week vs. Past week, here’s a view of how the interval can make a difference for the results.   I have the Veeam ONE Catch of the Day (#VeeamONECOTD) on Twitter, a nice way to get small nuggets of Veeam ONE stuff: https://twitter.com/search?q=%23VeeamONECOTD&src=typeahead_click  The Veeam reports are incredible visibility and it is a great way to get all the details you may need in another way!

Hi,I will change my vm’s hosting to use SCVMM.I don’t find page which explain the advantages to have SCVMM with veeam.I understand we have tags and, but I’m not sure, a live migration of a VM don’t affect backup chain.Is not it ?What is the bests practices to configure relationship between Veeam and SCVMM ? Sorry for my english.Have a good day !

Today’s #VMCE2020 #DailyQuiz walkthrough is ready. Do you use SureBackup today? If no, why not? Too complicated? Did you try the backup validator tool to check for silent corruption of your backup files?