News, guidelines and various community projects
Recently active
Hello, we are using file-to-tape jobs to archive old files like pst files. After running the file-to-tape job we delete the files on the file-system.In the Veeam B&R console you can find the archived files in the “files” section and you can search the file name. This information is stored in the tape catalog data and you can find this by double clicking on the tapes, too. So this information is saved in the database, but how can i migrate or export/import this information to another veeam server? I am currently migrating some smaller Veeam server together to one single management server and the smaller server will be used as backup proxy. (without db) So on a new Veeam server i will get this information only by doing a inventory and catalog of all the old tapes.Is there another solution for this ?
Hi, One of my customer currently has “Veeam Availability Suite” License and has “Veeam One” Deployed. They did a Failover and Failback of a Single VM Manually using the VBR console and would like to get a report from Veeam One with the following information:Start time of the Failover. Time it took for the failover. Amount of Data Replicated during the failover. Start time of the Failback. Time it took for the Failback. Amount of Data Replicated during the Failback.I have checked Veeamone and unable to find a report that can provide this information. Is there anyway without using “Veeam Disaster Recovery Orchestrator” to get this information. ThanksRavi
I took the time to create in Draw.io a client scenario., with the 3 cores components Backup Server - Proxies - Repositories would look as follows Only one with Windows ….
At Veeam, community has always been an important part of our culture and development. As we want to foster even deeper engagement that rewards our customers and partners for the role you’ve played in our success, we are excited to announce the launch of the NEW Community Program, Veeam Legends. Veeam Legends are Veeam users and data protection industry experts who are passionate about technology, innovation and eager to further develop their career, while sharing their experiences with the community. As avid Veeam users, they participate in various community projects, drive local Veeam User Groups and can also influence development of Veeam products and solutions. Apart from that, Veeam Legends are always eager to help their peers and get connected with other community members.Become a Veeam Legend and get exclusive access to:NFR licenses, private betas and prelaunch briefings Veeam R&D insights Veeam Legends swag An invite to the private Veeam Legends group And more!Be an active p
Hello, I have been asked by one of Veeam partners about my take if it comes to Veeam support for VMware Horizon VDI platform, despite the choice of taking the POC option I also chose to take your input on this. Considering that VMware Horizon VDI is based on ESXi, do we still consider the desktops(Instances) or sockets as unit of licensing? If so, is there any operational implication or/and limitation if it comes to operations and protection of the VMware Horizon components? Just to mention I was able to get this old article (posted 2011) but with many Veeam versions since then I decided not to fully reference ithttps://forums.veeam.com/vmware-vsphere-f24/vmware-view-best-practices-backing-up-vdi-server-clients-t6517.html
Has anyone set up a Scale-out Backup Repository using an Azure DataBox? Having certificate issues for all the jobs copying (from the Repository)to the DataBox.
Happy Friday!I and @Rick Vanover review the week's activity Shout-outs to @mariuszr, @MattM and @Chris.Arceneaux for making it into this episode!
Full details here: https://www.veeam.com/kb4135 Shoutout to @AnthonySpiteri for blogging about this! Anthony’s blog post goes into more detail about this and is well worth a read! https://anthonyspiteri.net/veeam-backup-for-office-365-v5b/
Hello,I need recommendations and perhaps solution on this issue. I have got to archive on-premise data to Microsoft azure.When I got to the point where I had to scale out repositories, I keep getting an error that the target repository is being used for jobs.I tried creating another repository but it got to a point the wizard asked if I will be Ref file type to format and had to stop because I don't know if that will format the entire volume that the backup jobs resides.Kindly help on what to do.Thanks.
So, today I’m gonna show you a simple comparison with 1 VM per job versus 2 or more VM per jobs. On my scenario I have 2 VM for my Active Directory environment with 40GB size each.----------------------------------------------------------------------------------------------------------------------------So, in first example I create 1 job per VM: In this shape it consume exactly 40GB on my repository: ----------------------------------------------------------------------------------------------------------------------------In the second example a create a unique job for the same 2 VM’s: And in this shape it consume 37GB on my repository:---------------------------------------------------------------------------------------------------------------------------- How can we see deduplication of Veeam B&R gives a good space on our backups.In this environment was only 2 small VMs, but now you can imagine how this impact an entire datacenter.
Probably the following is widely known. But I did not know up to now and found out today. Maybe it is new for others too.After the Upgrade to v10, suddenly Linux VMs are not getting backed up any more, because defined guest interaction user was domain-based and could therefore not login into Linux VM. So solution would simply be to disable guest processing for this VM. Problem was, VMs were selected by vSphere Tags for this job. Fortunately solution is quite simple:Edit the job and got to Guest Processing and click Application Here you can see the selected vSphere Tag. When you edit this line, options are set for all VMs this Tag was assigned to. Press Add → VMs and Tags → expand Tag of choice → select exception VM Select new line and press Edit Set option as desired for this/these VM(s) That's it! This also works for custom Guest OS Credentials: BTW: If you suffer from the same behavior after upgrading to v10 (and probably to v11 as well): Curiously this is not a bug, it is a bu
Hey everyone!In this episode, I and @Rick Vanover recap this week's activities, and also share some VeeamON agenda secrets! You don’t wanna miss it! Check it out now
If you haven’t heard, Veeam Disaster Recovery Orchestrator v4 (formerly known as Veeam Availability Orchestrator) is now available, and better than ever.Now VDRO can orchestrate recovery for 4 types of your protected data:Veeam CDP Replicas - NEW in v4 Veeam Replicas Veeam Backups Replicated Storage Snapshots (NetApp ONTAP and Lenovo ThinkSystem DM)This means you have the ultimate in flexibility and choice when it comes to protecting all of the data in your environment. From mission critical apps, to those dev environments that would be nice to recover easily but are usually ignored for DR planning purposes, you can do it all with the same tool, the same way.It couldn’t be simpler to create a DR plan in Orchestrator. Check out this video where I create a CDP Replica orchestration plan, run a readiness check, and launch a failover in less than 10 minutes.There are some subtle differences between plan types, but yes, Orchestrator is really that easy to use. You can even get granular an
Hi all!With the release of Veeam Backup & Replication version 11, the following KB article is continuously updated to reflect the most recent patch available: KB4126: Release Notes for Veeam Backup & Replication 11 Cumulative Patches.Since there is no easy way to subscribe to Veeam updates in general, I have personally setup a monitor on https://visualping.io. It has been very helpful to configure a monitor to this support article, to get notified via e-mail every time there is a new patch available.As a bonus, you have 65 free scans per month. This should be sufficient for two endpoints with daily scanning.I hope you find this helpful.Best regards,Preben
hi alli have vm is Mikrotik at vmware i backup it when i restore it to other server it changed software ID it selfi want to backup the software ID cuz licenseswhat can i do ?thank you
When provisioning public IP addresses within VCC there isn’t a mechanism that allows to assign/unassign public IP addresses to specific customers. Scenario: I have multiple IP address blocks, each with a different default gateway, if I pre-populate these various blocks into VCC, it will pick an IP address at random, regardless of the primary IP, subnet and default GW assigned to the NEA with no way of correcting this. The only workaround is to keep only the IP addresses in use within the configuration and when expanding the number of IP addresses used by a customer, provisioning the addition IP into the VCC configuration and then immediately increasing the public IP count for that customer by the number of additional IP required. This causes headaches if a customer outgrows the available IP addresses within a scope and requires a lot of work to reconfigure failover plans etc vs a centralised management. How does everybody else deal with this? I’d like to see Veeam enable some form of p
Happy Friday, everyone!I and @Rick Vanover recap this week's activities with the Veeam Community Recap #21 ! Shout-outs to @mariuszr, @vNote42 and @JMeixner for making it into this episode!
Veeam have just announced their latest cloud first product! Full details here: ETA Unknown.
Happy World Backup Day, Veeam Community! First of all, come and join us today for the celebration of World Backup Day with LinkedIn Live event hosted by @Rick Vanover and Didier Van Hoye, Microsoft MVP and Veeam Vanguard Secondly, you have probably noticed Alfred the Cat on the new home page header banner? (YES, he’s back!) Well, there are some easter eggs hidden, each based on certain Veeam features and technologies! Will you be able to find them all? Share your answers in the comments and let's see who'll collect them all first!
Hello, We have Veeam Backup & Replication v10. We do backups of our file servers VM’s (in ESXi 6.7) with guest file system indexing option enabled. Also we have tape backup jobs of these servers.We need to restore an individual file from a tape media set, is there a way to restore that file directly from the tapes? or I need always restore all the vbk file to a disk before to do a file restore from tape? Thanks in advance, Omar De Souza.
Hey everyone!VMware released some unexpected news yesterday regarding the end of support for vSphere & vCenter 6.5 and vSAN 6.5 & 6.6. These were both originally intended to reach End of General Support (EoGS) this year, on the 15th November 2021. VMware are now extending this general support window to the 15th October 2022, no changes to the end of technical guidance have been announced.This date might seem familiar, vSphere 6.7 reaches EoGS on the 15th October 2022, meaning unless you have an extended support contract with VMware, this is the date you will need to migrate away from the vSphere 6.x platform by!VMware have kept things simple by extending the EoGS for vSAN 6.5 and 6.6 to this same date which also coincides with vSAN 6.7 EoGS.In summary, things are a lot more simple, on a vSphere/vCenter/vSAN 6.x release that isn’t already EOL? It will reach EoGS on the 15th October 2022 now.However, like so many freebies, there can be strings attached, such is the case here. So,
This is the second part of my SQL Instant Recovery posts. First part:I would like to list some of the software’s behaviors here.Veeam Explorer for Microsoft SQL Server is closed. One could gain the impression from the documentation Veeam Explorer does the whole work. This is not the case, if Explorer gets closed, just start it again. Mount Server, proxy or repository Server is offline. This is a problem, because these components are necessary for keeping your Instant Recovery database alive. Fortunately Veeam took this into account. So the system checks periodically (every 5 minutes) if needed components are online again and re-establish all connections. If you fixed the problem before next scheduled retry, you can trigger the retry manually by pressing the Retry button.Restoring to original locating with original database still in place. The Explorer wants to have your decision confirmed. Veeam VBR Server uses older SQL Server version than source Server. This is generally not a proble
Here’s the final vote for a CAT’s name. We have 2 finalists: Alfred and Veeameow.I can’t add another poll to original topic, so adding it separately - but here’s the link to entire discussion for reference.Let’s finalize it once and for all!
One of the challenges that I have faced learning Kubernetes is persistent storage. It is a steep learning curve but one of the most essential areas elements necessary to make containers become a real force in the world of computing. There are many flavors of Kubernetes persistent storage and making the right choice for your workload and application s is no trivial matter.Would it not be nice if there was some helpful utility to test and validate my persistent storage setup?Well now there is thanks to Veeam Kasten’s Kubestr!As stated on its web page “Kubestr is a collection of tools to discover, validate and evaluate your kubernetes storage options.”Lets take a look at what this thing can do:You can download Kubestr here: https://github.com/kastenhq/kubestr/releases/tag/v0.4.13 I chose the Linux binary and downloaded to my control node.Untar the the tarball and you are ready to go. In linux make the file kubestr executable by typing in sudo chmod +x kubestr Then run .kubestr and it will
Hello community,I don’t know if this is common knowledge (I guess all the hardcore Windows Admins hanging around here know this), but I think I share this, nevertheless.I have tried to back up a Windows 10 PC with a server managed VEEAM agent for the first time today (up to now there were Windows Server only). In this environment is no Windows Domain present, local users on all systems only.When I tried to connect to the Windows 10 PC from my VEEAM Server to create a managed server the connection was refused. No specific error message, it just failed… OK, I tried to ping the PC and to connect to it, all ok. Then I tried an administrative share and it failed, too. So, it seems not to be a VEEAM Problem, but a Windows problem…I did some internet research and found that the Windows administrative shares are not accessible by local accounts over the network since Windows Vista. OK, this is some time, but… when do you do such a thing?After some more reading I finally found the solution. You
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.