Discussion Boards

Hi,I’m a bit confused about the difference of old Veeam forum and new community discussion board.  I just posted in old forum, but as it’s not allowed to post log file content there, I’ll give it a try here too.  I'm setting up our first Linux based backup repository based on Apollo 4510 server (Veeam 10). Now the jobs have different kind of errors. Before I open a case I wanted to know if those problems are known issues with an easy workaround. This all seems to be related to load, as it happens only when multiple backups are running. But there is not much CPU load and no errors in the usual linux logs.#1 at this time backup jobs were writing active fulls with 1,5GB/s over LAN to the server, CPU was 90% idle (52 cores). Nothing interesting in /var/log messages.[15.05.2021 15:19:27] <326> Error Failed to upload file D:\Veeam\Backup\VeeamAgent64 to /tmp/VeeamAgent0bc9a8bd-ebd8-44b8-a373-44510aefd89f[15.05.2021 15:19:27] <326> Error Failed to find terminal prompt: timeout occ

I'm getting several warning is the windows logs. It seems to all be to do with the logging  Cannot write into storage C:\ProgramData\Veeam\Backup\Utils\Util.VolumesHostDiscover.log Text: System.ObjectDisposedException: Cannot access a closed file   I have deleted the logs and they recreate and the events are recorded but throw this warning.   This is a Community edition of VBS 11

I’m currently running the 30-day trial version of Office 365 backup (5.0.1.225) and everything has been running well for the last 10 days or so.   I have the software set up to run every 8 hours for a whole organization backup. Out of the blue, last night, the backups started failing with “Access denied.  The remote server returned an error: (403) Forbidden”The admin password is the same and Azure AD shows the login for the Veeam account as successful.  I’ve checked our Office 365 Health panel and see nothing new that might impact the backups.  I’m running a backup to a local repository and have rebooted the backup server and the proxy server.  I have plenty (4.8+ TB’s) of storage available on the repository. I went into the Organization setup and reentered the credential info and all of the checkboxes came back as successful. Has anybody else encountered this issue or does anybody have any hints for how to alleviate it?

Are there any plans to add Backup to tape option for backups created by Veeam Plugins? 

Hey all,I’m just working with a 30-day trial and really focused on backing up my MS 365 environment. I set up a test using my on-prem backup server as the proxy and offloading the data to an Azure Blob (also a trial). And it worked! :DBut it’s slow. Like 1.2 MB/s processing rate.My question is, has anyone setup something similar with an Azure VM as the proxy? And if so, does it improve performance? Thank you very much for your time!

Am I the only one who does not like the fact that the Linux Backup/Mount Proxy needs a user that can do a su or sudo on anything?I would love to see the list of commands the Linux Proxy service user is actually using and then I would configure the sudoers list to allow those commands and nothing else.If the service user has the permission to execute any command with sudo, it de facto becomes a second root user, which we would very much like to avoid on any of our Linux boxes!Let me know what you think!

Hello. I have just configured a test lab of Veeam Community 11. I have servers and workstations configured. I get get notifications of servers but the workstations using the agent doesn’t seem to work !  must be missing something  tony

Hi, AllI need to update many free agent on Windows station, after update my Veeam server from 9.5 to 11I’ve think to GPO, but before dive in my GPO, anybody have another solution or advise ?Thanks  

Hi Folks, Just wanted to share my opinion on this. I was around when Cloud Connect was introduced and remember the struggle with customers when explaining backup copy job copy intervals. Often I would hear.. “can we not just have our legacy, backup job done then offsite?”. Veeam brought in the immediate copy not to long ago and I have already noticed some issues. When you leveraged periodic BC jobs you could set the copy interval differently for tenants with different quality bandwidth. I could be wrong but with Immediate copy if it gets behind it will copy one day, then right away try the next in order to catch up. If you have many backup copy jobs and only so many concurrent connections available this then becomes an issue. I prefer periodic copy, I can say to the tenant, yes we will get your backup copy jobs over the wire but with your current bandwidth we need 3 days… then it is up to them to increase bandwidth. 

Is it possible to report on a clients Recovery Point Objective?

@Gostev mentioned some data loss issues in conjunction with VMware Tools quiescence in his current “the word from Gostev”. This method is used, when Veeam application-aware processing is not enabled ...… but “VMware Tools quiescence” is.Also because of such issues, Veeam recommends using their application-aware backup.So I want to ask the community, which backup method for application awareness do you use for Windows vSphere-VMs:Veeam application-aware processing VMware Tools quiescence.I personally try to implement Veeam processing whenever possible (security, network,...). At least for AD, SQL-based applications, Exchange, ...  

Veeam is at IBM Think in May.Register, get a free T-Shirt and get the chance to win additional prices.  https://www.veeam.com/ibm-think-2021.html 

I want to share a blog post by John Nicholson (VMware - not the guy from Shining !) which is about VMware Backup Myths. If you are in a backup related job, it could be funny to read. I did not know some of them!https://thenicholson.com/backup-myths/My favorites are:Virtual machine backups are not useful for file, or app level recovery. Agent-based backups are “lighter-weight” than hypervisor-assisted backups. Network based backups will bottleneck on the vCenter. Snapshots Suck. Here you have to read details in post! Enjoy reading!

Hi,we are running VMs on vSAN (VxRail). Backup with hot add mode works fine. Anything is ok.We are planning now, to offload big disks (>3 TB) to an iSCSI Storage device. z.B. PowerStore. So the VMs are running a mixed disk placement. System Disk stays on vSAN. Data Disk will be on iSCSI Storage. iSCSI Storage is attached to the same TOR Switch as the Veeam Rep Server. VMs are not stretched in the vSAN Cluster. Whats the best way to backup? What is your recommandation?  

Kasten 4 by Veeam is out today folks and it has some big news!! https://blog.kasten.io/ransomware-protection-kasten-k10-v4?hsCtaTracking=01895365-d3ab-4328-82e7-7e8e93bcc630%7C15fc9b41-2024-489a-890b-62fd5b66231f

Hi, I have installed Veeam B&R v11 on a windows machine running a 5 Hyper-V vm. I have registered my Hyper-V using backup infrastructure > Add server. It now shows up in backup infrastructure > managed servers > microsoft Hyper-V > Standalone servers. I have created a backup repository on a NAS on the local network. But when I want to create a backup job (home > backup job > Virtual Machine), I have no VM listed. Any advices on what I’m missing to be able to backup my VM?  

Hi, I have configured a backup job on all Teams and on first run, i am alerted the mailbox is already being protected by another job. 11-12-2020 11:04:59 :: Processing mailbox XXX completed with warning: Mailbox is already processed by another job This is correct, as i have a backup job doing backup of all mailboxes every 4 hours. What is best pracgtice? To do complete Teams backup including the mailbox in one job, and on another job do all my mailboxes and exclude the Teams mailboxes? As of now where i have the Teams mailbox backup done by another job, how would a Team site restore be done?  RegardsRobert 

i want to be a Veeam VMCE, but in my country no Veeam Training center. As per I know that it is need to take trainig before sit in the exam.So that I request to Veeam, is it possible to crate any on deamnd course like VMware, so that we can take the training and sit in the exam. I request to Veeam to see the issue. Stay Home, Stay Safe.

Hi,since Veeam is offering more cloud features, it would be great to get an new training with a focus on all the cloud features. AWS, AZURE etc. DR/AWSSo as add on to the VMCE Veeam Cloud Certified Engineer :-)  

Hi,I would like to offload Archives to AWS Glacier. I added a AWS Glacier Repository to an sobr as archive exent. Once offloading starts I get the following error messages.I thing that the gateway server is not able to connect by ssh to the ec2 proxy appliance? Are these Appliances deployed in advance, or just temporary during archive offloading job? It is a new deploy, we didnt use these feature. 01:42:55    Failed to provision a proxy appliance: Unable to connect by SSH to appliance.     04:3201:47:28    Queued for processing at 28.04.2021 01:47:28     01:47:33    Task failed. Error: Unable to archive backups: no proxy appliances are available.     01:47:33    Processing finished with errors at 28.04.2021 01:47:33      

Register by May 13th for Pure Accelerate and get your free T-Shirt.https://www.veeam.com/pure-accelerate-2021.html#veeamatpureaccelerate 

Veeam ISOs and updates are all behind a login portal, how do you all handle downloading patches and fresh installations for customer environments? Some customers don’t wish to supply email addresses for Veeam accounts or they’ve registered it to an IT contact’s email address and so again, due to the integrations between the download portal and Veeam R&D forums (and even here at the Veeam Community) it’s providing access to far more than necessary for a download. The alternative is using our ProPartner accounts for downloading these files but then the question becomes, can we trust the customer’s network? In the age of zero trust that doesn’t seem wise. Finally with all the remote working requirements it feels excessive to be downloading files from Veeam to my own machine and then upload to the client device. Upload speed of residential connections is not the UK’s strongest point… Curious if other people share these difficulties?

Hi Folks, I have had a love/hate relationship with SOBRs. I am hoping I will be more on the love side going forward with the ability in V11 cloud connect to evacuate individual Tenants from a SOBR. I am finding that it is best to keep the number of extents down to low numbers, maybe even just 3. Also if using VMs, then one VM per extent otherwise your cpu and memory resources get divided by each extent. Keeping in mind that each concurrent task requires 1 core and 4gb of memory you don’t want this divided. Also if leveraging fast clone both on REFS and XFS you need even more memory.  What has been your experience with SOBRs?, especially for cloud connect? 

NEW study guide Are you looking to earn your VCP‑DCV 2020 certification ? Well, Shane Williford and Paul Wilk, along with Veeam, have you covered! Grab the latest edition (vSphere 6.7) of our VCP Study Guide.This 131‑page study guide covers all 7 of the exam blueprint sections to help you prepare for the VCP‑DCV 2020 exam. Guide available in .pdf and .epub formats.https://go.veeam.com/vcp-dcv-2020-exam-guide.html  

Hi,We are having some backups copied to an AWS bucket using Veeam Backup and Replication 11. The backups have been copying up to the bucket okay but today I was going to practice restorations and am a little confused about whether I did a restore from the internet or from the performance tier. The log said the restore was from AWS Veeam Object1 which should be the Amazon server. It seemed kind of quick. I was expecting it to take hours for a small server. It was 34 minutes. Maybe de-duplication is really good.This was in the log:Restoring Hard disk 1 (40 GB) : 30.3 GB restored at 18 MB/s  [nbd] 3.9 GB downloaded from capacity tier, 9.9 GB copied from performance tierSo far I haven’t seen any documentation that specifically walks us through restoration from a bucket.It’s possible I’m still thinking of our network speed with a 2015 frame of mind. I want to be sure I’m doing this right. Thanks,Bob