Community

Hi,We are having some backups copied to an AWS bucket using Veeam Backup and Replication 11. The backups have been copying up to the bucket okay but today I was going to practice restorations and am a little confused about whether I did a restore from the internet or from the performance tier. The log said the restore was from AWS Veeam Object1 which should be the Amazon server. It seemed kind of quick. I was expecting it to take hours for a small server. It was 34 minutes. Maybe de-duplication is really good.This was in the log:Restoring Hard disk 1 (40 GB) : 30.3 GB restored at 18 MB/s  [nbd] 3.9 GB downloaded from capacity tier, 9.9 GB copied from performance tierSo far I haven’t seen any documentation that specifically walks us through restoration from a bucket.It’s possible I’m still thinking of our network speed with a 2015 frame of mind. I want to be sure I’m doing this right. Thanks,Bob        

Visit the Kasten website an complete the lab to get a free KubeCon Europe Passhttps://play.instruqt.com/kasten/tracks/kasten-kubernetes-labEven without the free pass is the lab a great starting point for your journey into containers, Kubernetes and Kasten...

I am using Veeam Backup & Replication 9.5 Update 4.My backups are sent to Amazon S3 buckets after 30 days.I am trying to do a Instant VM recovery from a Restore Point located in the S3 bucket.I ran the restore and the Log file is telling me.Restore session Status: In progress.Log (Last 2 lines)<machine name> has been recovered successfullyWaiting for user to start migrationI don’t know where to go from here. I am having a hard time finding any documentation for this.Using vSphere Client version 6.7.0.46000Any help would be appreciated. 

Hello everyone, today I bring you one more step on how to correctly secure our instance of Veeam Backup for AWS v2.To do this we will rely on Let’s Encrypt, the famous open-source project that allows us to generate free SSL certificates.NOTE: This process is not officially supported by Veeam, and any consequence of following the steps incorrectly, or any incidence derived from these steps will leave us without support. We will have to deploy the appliance again, keep that in mind!Where shall I run this Script?My recommendation will be to run it from a Linux VM, Container, or similar that you have already on your on-prem, or in the Cloud. As a last alternative, not supported of course, is to follow these steps inside the Veeam Backup for AWS appliance itself.Installation of system requirementsTo make it all work we’re going to need a couple of packages to do all this automatically:jq The necessary Let’s Encrypt packagesTo install jq, we will launch the following command:sudo apt-get ins

Hey everyone,I wanted to share this recent blog post I made with yourselves as whilst it’s not directly related to Veeam, I was helping someone that had locked themselves out of a Veeam database and needed to take a native backup for a support case with Veeam.  I was recently helping a customer create a SQL database backup for a support ticket and noticed that they had an interesting SQL Server configuration. There was only a single account with sysadmin rights, the sa account, but this account wasn’t allowed to sign in. The SQL Server was domain joined but there was just a single group allowed with Windows Authentication and that had the “public” server role only.There are a few reasons this could happen, accidental permission changes, or groups and/or user accounts being deleted from the domain that had been assigned the sysadmin role as examples. Thankfully it’s not the end of the world for you if you find yourself in this situation. Breaking Back into your database! This will invol

Hello There, I just wanted to share an issue I had on one of my customer to avoid others the problem:We setup a standard Veeam Backup & replication Server on a W2019 VM and a Std SQL 2019 on another one to host the DBs from VBR and Enterprise Manager.The DBA from the customer insisted to setup an alias for the DB server when pointing Veeam to its Database server as it’s their best practice to facilitate migration (He was obviously not aware how easy it is to move Veeam Database). So he setup a CNAME that pointed to the real SQL server.The setup went well using the CNAME. We created a “management job” to save Veeam by itself, VBR+SQL servers. The job detected the roles and proceeded as normal but failed on SQL VSS processing. We spent a lot of time to validate that permissions were right (the DBA didn't gave us the sysadmin rights on the backup service account, wise guy) and that the service account on the SQL had the proper permissions too for the VSS writers. Long Story short: I f

Can any one speak to Pure FlashArray//C Dedupe/Compression in combination with Veeam space efficiencies? Can Pure still get 3:1 after Veeam does its thing? I’m getting mixed messages on this. Thanks in advance!

Today’s topic will be regarding Cloud Native workloads within Azure & AWS and how best to adhere to Veeam’s 3-2-1-1-0 best practices and how concepts can differ from traditional on-premises data protection. Remember the 3-2-1-1-0 best practice is a minimum desired standard and going above and beyond these minimums will help your data availability and recoverability objectives.The public cloud has provided a huge transformation opportunity for organisations, the pay as you go model enables organisations to deploy quickly and without the overheads of infrastructure management. But these platforms are still part of a shared-responsibility model, with a key risk that you retain being, the protection of your data.3 - Copies of Your DataLets start with the easiest one. Three copies of your data, including your production data. Public cloud services such as Azure will inform you that they retain three synchronous copies of your data as a minimum via their “Locally Redundant Storage” offer

Hello, we are using file-to-tape jobs to archive old files like pst files. After running the file-to-tape job we delete the files on the file-system.In the Veeam B&R console you can find the archived files in the “files” section and you can search the file name. This information is stored in the tape catalog data and you can find this by double clicking on the tapes, too. So this information is saved in the database, but how can i migrate or export/import this information to another veeam server? I am currently migrating some smaller Veeam server together to one single management server and the smaller server will be used as backup proxy. (without db) So on a new Veeam server i will get this information only by doing a inventory and catalog of all the old tapes.Is there another solution for this ?  

Hi,    One of my customer currently has “Veeam Availability Suite” License and has “Veeam One” Deployed. They did a Failover and Failback of a Single VM Manually using the VBR console and would like to get a report from Veeam One with the following information:Start time of the Failover. Time it took for the failover. Amount of Data Replicated during the failover. Start time of the Failback. Time it took for the Failback. Amount of Data Replicated during the Failback.I have checked Veeamone and unable to find a report that can provide this information. Is there anyway without using “Veeam Disaster Recovery Orchestrator” to get this information. ThanksRavi

I took the time to create in Draw.io a client scenario., with the 3 cores components Backup Server - Proxies - Repositories would look as follows   Only one with Windows ….      

Hello, I have been asked by one of Veeam partners about my take if it comes to Veeam support for VMware Horizon VDI platform, despite the choice of taking the POC option I also chose to take your input on this. Considering that VMware Horizon VDI is based on ESXi, do we still consider the desktops(Instances) or sockets as unit of licensing?  If so, is there any operational implication or/and limitation if it comes to operations and protection of the VMware Horizon components?  Just to mention I was able to get this old article (posted 2011) but with many Veeam versions since then I decided not to fully reference ithttps://forums.veeam.com/vmware-vsphere-f24/vmware-view-best-practices-backing-up-vdi-server-clients-t6517.html

Has anyone set up a Scale-out Backup Repository using an Azure DataBox?  Having certificate issues for all the jobs copying (from the Repository)to the DataBox.  

Full details here: https://www.veeam.com/kb4135 Shoutout to @AnthonySpiteri for blogging about this! Anthony’s blog post goes into more detail about this and is well worth a read! https://anthonyspiteri.net/veeam-backup-for-office-365-v5b/

Hello,I need recommendations and perhaps solution on this issue. I have got to archive on-premise data to Microsoft azure.When I got to the point where I had to scale out repositories, I keep getting an error that the target repository is being used for jobs.I tried creating another repository but it got to a point the wizard asked if I will be Ref file type to format and had to stop because I don't know if that will format the entire volume that the backup jobs resides.Kindly help on what to do.Thanks. 

So, today I’m gonna show you a simple comparison with 1 VM per job versus 2 or more VM per jobs. On my scenario I have 2 VM for my Active Directory environment with 40GB size each.----------------------------------------------------------------------------------------------------------------------------So, in first example I create 1 job per VM: In this shape it consume exactly 40GB on my repository: ----------------------------------------------------------------------------------------------------------------------------In the second example a create a unique job for the same 2 VM’s: And in this shape it consume 37GB on my repository:---------------------------------------------------------------------------------------------------------------------------- How can we see deduplication of Veeam B&R gives a good space on our backups.In this environment was only 2 small VMs, but now you can imagine how this impact an entire datacenter.

Probably the following is widely known. But I did not know up to now and found out today. Maybe it is new for others too.After the Upgrade to v10, suddenly Linux VMs are not getting backed up any more, because defined guest interaction user was domain-based and could therefore not login into Linux VM. So solution would simply be to disable guest processing for this VM. Problem was, VMs were selected by vSphere Tags for this job. Fortunately solution is quite simple:Edit the job and got to Guest Processing and  click Application Here you can see the selected vSphere Tag. When you edit this line, options are set for all VMs this Tag was assigned to. Press Add → VMs and Tags → expand Tag of choice → select exception VM   Select new line and press Edit Set option as desired for this/these VM(s) That's it! This also works for custom Guest OS Credentials: BTW: If you suffer from the same behavior after upgrading to v10 (and probably to v11 as well): Curiously this is not a bug, it is a bu

If you haven’t heard, Veeam Disaster Recovery Orchestrator v4 (formerly known as Veeam Availability Orchestrator) is now available, and better than ever.Now VDRO can orchestrate recovery for 4 types of your protected data:Veeam CDP Replicas - NEW in v4 Veeam Replicas Veeam Backups Replicated Storage Snapshots (NetApp ONTAP and Lenovo ThinkSystem DM)This means you have the ultimate in flexibility and choice when it comes to protecting all of the data in your environment.  From mission critical apps, to those dev environments that would be nice to recover easily but are usually ignored for DR planning purposes, you can do it all with the same tool, the same way.It couldn’t be simpler to create a DR plan in Orchestrator.  Check out this video where I create a CDP Replica orchestration plan, run a readiness check, and launch a failover in less than 10 minutes.There are some subtle differences between plan types, but yes, Orchestrator is really that easy to use. You can even get granular an

Hi all!With the release of Veeam Backup & Replication version 11, the following KB article is continuously updated to reflect the most recent patch available: KB4126: Release Notes for Veeam Backup & Replication 11 Cumulative Patches.Since there is no easy way to subscribe to Veeam updates in general, I have personally setup a monitor on https://visualping.io. It has been very helpful to configure a monitor to this support article, to get notified via e-mail every time there is a new patch available.As a bonus, you have 65 free scans per month. This should be sufficient for two endpoints with daily scanning.I hope you find this helpful.Best regards,Preben

hi alli have vm is Mikrotik at vmware i backup it when i restore it to other server it changed software ID it selfi want to backup the software ID cuz licenseswhat can i do ?thank you

When provisioning public IP addresses within VCC there isn’t a mechanism that allows to assign/unassign public IP addresses to specific customers. Scenario: I have multiple IP address blocks, each with a different default gateway, if I pre-populate these various blocks into VCC, it will pick an IP address at random, regardless of the primary IP, subnet and default GW assigned to the NEA with no way of correcting this. The only workaround is to keep only the IP addresses in use within the configuration and when expanding the number of IP addresses used by a customer, provisioning the addition IP into the VCC configuration and then immediately increasing the public IP count for that customer by the number of additional IP required. This causes headaches if a customer outgrows the available IP addresses within a scope and requires a lot of work to reconfigure failover plans etc vs a centralised management. How does everybody else deal with this? I’d like to see Veeam enable some form of p