Community

working in a client env with veeam v11 and 12….just upgraded to v12.we have issues with replication not working (started all of a sudden 3 weeks ago). Support said that it was a known issue in v11 and we needed to upgrade. Tbh I wasn’t convinced as its been working fine for some time.Anyway we upgraded to v12 but replication is still not working.You can see that the copy is seen as in-progress so Veeam is just trying to send data. You can also see on the storeonce side that Veeam files have landed/created with ZERO bytes. It just sits there for hours and you dont see any data being transmitted for some reason…..We do have a call with support but just wondered if you guys had any ideas. We’ve involved HPE and run scripts on the storeonce appliances which are able to send files between the devices (1G files, 10G files etc).

Hello everyone,I didn’t find configuration backup and restore in VBM like VBR, what is the best approach to do it? both backup and restore the entire server, and install it from scratch?

Hello everyone,I would like to draw your attention to an issue detected following the Veeam upgrade to version 12 at one of my clients. This also applies to new installations.During backup and restoration operational tests, which are crucial to perform during installation/post-upgrade, the following error message appeared when restoring a VM: Unable to use Hot-Add mode.While analyzing the logs of a backup job, the proxies switched from Hot-Add to NBD mode.After analyzing the logs and isolating the issue to a single proxy (Forcing the proxy to use only Hot-Add + creating a test backup job with only this proxy), I was able to obtain a more informative message.

Hey Guys,I had a backup fail last night due to a datastore no longer having enough space to process  Is this a threshold that can be configured somewhere?How much space is actually needed to process a backupI am trying to find some more info in the logs but havent seen anything yet  Thanks,

Another post about my favorite feature in v11: Hardened Repository. This time it is about the ability to change the expiration date of already immutable restore points. Veeam made this possible by using PowerShell. The corresponding command is: Set-VBRImmutabilityLockExpirationDate. This post is about how to use it.Select the restore point you want to change immutability expiration date. To show all restore points of a specific VM in a job you can run for example:Get-VBRRestorePoint -Backup immu_job_01 -Name VM02Here backup job name is Immu_Job_01 and VM is called VM02. I will change the date for the first - the oldest - restore point in the list. To work with it I save it in $RestorePoint:$RestorePoint = (Get-VBRRestorePoint -Backup immu_job_01 -Name VM02)[0]

A little bit late today but here we go! September is almost gone! (Unbelievable!😲) But we are not meant to talk about how time flies in this post! As you know, we are committed to organizing a poll every month to determine the top blog of the month that is going to be featured on the homepage and social media channels ! Let's see who is blogger of the month in September!Please help us determine the best by voting on your favorite one by October 1st. Good luck to all participants! @Cragdoo , @Nico Losschaert , @eeha0120next , @eprieto , @Nitish Kumar , @coolsport00 Please feel free to share it on your social media platf

Just a quick question...I was tasked with restoring OneDrive data from an account for a client that apparently left and the user was deleted, but someone else was accessing the OneDrive data while the user account was still in the Deleted Users status/folder, but once the 30 days elapsed, that data was purged.  This client is currently being backed up by Barracuda Cloud-to-Cloud backup (until I get those folks moved over to Veeam) but I noticed that the last backup of the data was before the user account was deleted.  Makes sense, but I hadn’t considered that their OneDrive would even be accessible by the other users during that time period if the user/mailbox had been marked as deleted.So my question is, if a user account is marked deleted, does VB365 still backup the deleted mailbox/OneDrive (or can it even do so - assuming that you had that user explicitly specified or had the job set to backup the entire organization, etc) until Microsoft purges that data?  I imagine I ca

Hi,I have installed Veeam agent on my windows 11 VM. I have a external hard drive connected to the physical host and shared the drive.I have it mapped on my VM.I cannot see it in my options for destinations.Is there any thing I can do to get this working? Thank you in advance.Colin 

I’m in the market for new storage at 2 sites. I’m hoping to get some input from the community here if any of you have a lot of data, or fast storage. Requirements - You need to be able to hit a minimum of 2GB/s on your Veeam jobs to post your solution. I want you to detail your proxy, repo, and storage setup as well. (This is not a competition though) Currently I have 2 V7000’s. I can hit about 2.2GB/s sending data to 6 LTO8 drives. I am hitting about 6k IOPS but the latency starts to increase at this point.  I’ve been happy with this storage, (7200RPM disks) but it’s time to upgrade, and I am looking at a few options. Option 1) Exagrid at 2 sites. 10+ EX84 per site    - Does anyone here own Exagrid storage? What is your performance like, how about long term restores? The price is decent, I just have concerns about a large scale instant restore, synthetic operations, merges etc.  (Those are my current pain points with my current v7000

Take a VMware On Demand course today, save on your exam on qualifying courses. Current qualifying On Demand courses Data Center Virtualization  vSphere: Install, Configure, Manage [V8], [V7] vSphere: Operate, Scale, and Secure [V8] vSphere: Optimize and Scale [V7] Network Virtualization 

Hi, our client just had a ransomware attack and unfortunately veeam server and backup files were affected. Client had to rebuild their servers and We had to reinstall Veeam and recreate backup from start again.We are looking into introducing tape as “offline” backup so we can restore backup files from it in worst case scenarios. My question is, if we reinstall Veeam B&R is it easy to re-introduced the Tape Library and is it easy to scan for it and retrieve/recover the Backup Files from it to Veeam Disk Repository?

Did you know we have a free exam voucher promotion for On Demand courses purchased through VMware? Current qualifying On Demand courses: Data Center Virtualization vSphere: Install, Configure, Manage [V8], [V7] vSphere: Operate, Scale, and Secure [V8] vSphere: Optimize and Scale [V7]N

Hello, I just recently installed Nutanix AVH for a client; they were previously on VMware (and backing up with Veeam). I setup two backup jobs that use the Nutanix AVH plugin/appliance, but to be honest, I am not “happy” with it, and am wondering if it might be better to use the Windows/Linux agent to backup, but not sure what pros and cons are. What I am not overly-happy with with the Nutanix AVH plugin are:   * Even though VMs are in the same job, backups get split per-VM, which I don’t think get any benefit from deduplication (though I think they benefit from compression still).  The agent-based backups seem to behave more like the VMware-based backups in  that the VMs in the same job get backed up to one file (named for the job), and benefit from deduplication (as well as compression)  * The “session report” is very light on details.  I had come to like the details provided by the “normal” session report I could see

We have contracted with a cloud backup service for Veeam Backup with bucket. We have been experiencing problems for a few days with the following errors.1- Error when trying to connect to the cloud repository to perform a Veeam backup.We have a backup job in Veeam Backup that sends 7 VMs to the cloud repository, however, on several days the error below occurs when trying to send this backup:2- This problem is generally occurring whenever the first problem occurs and it would be some type of error related to the tasks that Veeam Backup performs.The errors that occur are the following:

@PValsecchi already showed how to use vSphere tags for VM selection in VBR. New in v11 is the possibility to combine vSphere tags. I want to show how this work. For that, I created two tag categories. One for Location and one for Backup. I defined datacenter A and B locations; and Gold, Silver and Bronze backup priority. These tags are assigned to my 4 test VMs:So: VM01 and VM03 (odd n

hi, i would like to know, could i use my socket base license with VBR V12, and can i get all of features on VBR V12 with my socket base license ? such as Immutable with HLR, MFA, File Share Backup and so on  Thank You

hi, I would like to know that, could we build VBR server on AWS and backup our VM and physical on prem and store our backup file on S3 Bucket by using direct to object storage Thank You

Hi Everyone, Please join me on Sept 28th on Kodekloud’s celebration of free week. The show will be hosted by none other than Patrik Akil so I am very excited. Believe me as I talk about my experience in Data Protection from Physical, through virtual to Container workloads.. you can bet it won’t be boring :)   https://www.linkedin.com/events/7110978568662253568/about/?invite=false&message=false&sAtp=&sTrk=&sV=&showRequesters=false&showShareByPost=false 

Today’s #VMCE2020 #DailyQuiz walkthrough is ready. Do you have network-attached storage file shares in your environment? Have you ever used NDMP? 

Hello everyone, We have an HPE MSL3040 tape library and we have two F.C drives on it. The drives are detected on the Veeam server but one of them shows a red sign (screenshot attached). On device manager both drives are properly working. we are unable to use the parallel processing feature because the second drive seems to be non functional. Any ideas as to why this could be happening? Thanks in advance for your support.  

Dear Veeam Community,I hope this finds you well. I've encountered an issue after updating to Veeam Version 12 and was hoping someone might have come across a similar problem or can provide some guidance.**Problem Description:** After the update, I am unable to send notification emails. I consistently receive the error message: "Unable to connect to SMTP server because of invalid credentials or connection settings." I am certain of my credentials, having double-checked multiple times.Steps Taken:1. I've tried all configuration variants using both ports 587 and 465.2. When using port 465, I am able to apply the settings, but an error then displays.3. With port 587, the error surfaces after sending the test message.**Mail Server Error Logs:** From the logs, the following sections raised concerns:* `SASL login authentication failed`* `TLS library problem: error:14094412:SSL routines:ssl3_read_bytes:sslv3 alert

I am facing problems. Task failed. Error: Connection problems. Processing finished with errors.Veeam Backup & Replication Version 12

Hey folks,It seems like just yesterday that HashiCorp announced changes to the Terraform licensing plan and already there is a possible alternative on the horizon. The Linux Foundation announced today the formation of the OpenTofu project which is being billed as an alternative to Terraform. As they say, we will wait and see what happens but since LF is involved this is definitely not a dead from the start.You can read more here: https://www.linuxfoundation.org/press/announcing-opentofu