Blogs and podcasts

Bring your knowledge and expertise while creating blogs and podcasts

  • 646 Topics
  • 5,050 Comments

646 Topics

vNote42
vNote42Veeam Legend, Veeam Vanguard
posted inĀ Blogs and podcasts

Whatā€™s (also) new in vSphere 7 U1 - For Data Protection

In the following link you can read improvements in vSphere 7.0 U1 for data protection. Areas of improvements are:Ā Network QoS for Backup Traffic Improved backup job resilience Improvements in scalability for concurrent backup jobs vSphere APIs for I/O Filtering (VAIO) improvementshttps://blogs.vmware.com/virtualblocks/2020/11/18/whats-new-in-vsphere-7-u1-for-data-protection

3
eprieto
2 years ago
eprieto
eprietoVeeam Vanguard
posted inĀ Blogs and podcasts

Block Repositories - Block Sizes šŸ¤“

Block SizesĀ As can be seen from the field, optimal value for the stripe size is often between 128 KB and 256 KB. However, it is highly recommended to test this prior to deployment whenever possible.During the backup process data blocks are processed in chunks and stored inside backup files in the backup repository. You can customize the block size during the Job Configuration using the Storage Optimization setting of the backup job.By default Veeamā€™s block size is set toĀ Local Target, which is 1 MB before compression. Since compression ratio is very often around 2x, with this block size Veeam will write around 512 KB or less to the repository per Veeam block.This value can be used to better configure storage arrays; especially low-end storage systems can greatly benefit from an optimized stripe size.There are three layers where the block size can be configured: Veeam block size for the backup files, the filesystem, and the storage volumes.Letā€™s use a quick example:Ā The Veeam block size

11
regnor
2 years ago
haslund
haslundMr. VMCE
posted inĀ Blogs and podcasts

#DailyQuiz - #VMCE 2020 Scenario question 27 walkthrough

Todayā€™s #VMCE2020 #DailyQuiz walkthrough is ready.Ā Are you sending transaction log backups to an off-site location? How do you do it? What do you store them on?Ā Try this question and more atĀ https://rasmushaslund.com/vmce-practice-exam/

1
eprieto
2 years ago
haslund
haslundMr. VMCE
posted inĀ Blogs and podcasts

#DailyQuiz - #VMCE 2020 Scenario question 26 walkthrough

Todayā€™s #VMCE2020 #DailyQuiz walkthrough is ready.Ā Is your company 3-2-1 compliant? What do you consider as two different media types? One could argue at lot of options is ā€œdiskā€ in the end, but is HDD one media type and SSD a different media type? What if it is two different physical servers running Windows, is that two different media types?Try this question and more atĀ https://rasmushaslund.com/vmce-practice-exam/

0
haslund
2 years ago
haslund
haslundMr. VMCE
posted inĀ Blogs and podcasts

#HomelabWednesday - How to migrate Domain Controller and VMware vCenter to the new networks

In this week's episode of #HomelabWednesdays, I show you how to migrate your domain controller and VMware vCenter Server to a new network without issues.Donā€™t forget to subscribe to get automatic notifications whenever a new video is released.Ā 

0
haslund
2 years ago
vNote42
vNote42Veeam Legend, Veeam Vanguard
posted inĀ Blogs and podcasts

Check reflink and spared space on XFS repositories

I wrote already a post about checking Microsoft ReFS space savings. Now I want to show some basics to check XFS savings too.To check space savings on repository layer go to the repository directory and run: ls -lhsYou can see the size of each file and the total size of all files. If there a way to much files, run ls -lhs | grep totalĀ Compare this to the size allocated on the volume. To show this, run df -hĀ In this example you see space savings of: (86 - 35) = 51GĀ AnotherĀ way is the use the command xfs_bmap. It works on file-levelĀ andĀ is very technical. I am still not sure to interpretĀ all output correctly. At least it can show, reflink works!To show all extents of a file, this command can be used:Ā  xfs_bmap -e -l -p -v -v -v filename. Here also additional information like a legend is displayed.I made a small script to show the size of all shared extents of all *.vbk-files. But do not overstrain it, its experimental.#!/bin/bashfor f in *.vbkdo echo "File $f size of shared extends:" xf

1
haslund
2 years ago
eprieto
eprietoVeeam Vanguard
posted inĀ Blogs and podcasts

Hyper-V šŸ‘€ Backup Modes

Veeam Backup and Replication provides two different backup modes to process Hyper-V backups, both relying on the Microsoft VSS framework.On-HostĀ backup mode, for which backup data processing is on the Hyper-V node hosting the VM, leveraging non transportable shadow copies by using software VSS provider. Off-HostĀ backup mode, for which backup data processing is offloaded to another non-clustered participating Hyper-V node, leveraging transportable shadow copies using hardware VSS provider provided by the SAN storage vendor or SMB3 functionalityĀ Performance wise, since both backup modes are using the exact same Veeam transport services, the only differentiating factors will be the additional time requested to manage transportable snapshots (in favor of On-Host mode) and the balance between compute and backup resources consumption during backup windows (in favor of Off-Host mode).When using Windows Server 2016 or later, On-Host proxy mode is very fast and requires less components, thus re

2
gulzarshaikhveeam
2 years ago
haslund
haslundMr. VMCE
posted inĀ Blogs and podcasts

#DailyQuiz - #VMCE 2020 Scenario question 25 walkthrough

Todayā€™s #VMCE2020 #DailyQuiz walkthrough is ready.Ā How do you handle consistency during backups? Do you enable application-aware processing for all VMs? What about pre-freeze/post-thaw scripts? Do you have VMs where crash-consistent backups are sufficient?Try this question and more atĀ https://rasmushaslund.com/vmce-practice-exam/

0
haslund
2 years ago
haslund
haslundMr. VMCE
posted inĀ Blogs and podcasts

The OFFICIAL! Veeam Backup for Office 365 capacity calculator is LIVE!

The new official capacity calculator for O365 is now live atĀ https://calculator.veeam.com/vbo/You can either connect it to your real account and retrieve needed data or manually input data:If you love the full details you can click the ā€œShow detailsā€ button:This will definitely make it a lot easier to estimate capacity use, but also size VBO servers and proxies, just click on the little ā€œiā€ icon next to infrastructure sizing for even more information like CPU/memory:Ā 

21
regnor
8 months ago
haslund
haslundMr. VMCE
posted inĀ Blogs and podcasts

#DailyQuiz - #VMCE 2020 Scenario question 24 walkthrough

Todayā€™s #VMCE2020 #DailyQuiz walkthrough is ready.Ā Do you have different subnets/networks on your disaster recovery site(s) than your production site(s)? How do you handle re-ip for restores from backups or replicas today? What about non-Windows?Try this question and more atĀ https://rasmushaslund.com/vmce-practice-exam/

0
haslund
2 years ago
jorge.delacruz
jorge.delacruzCommunity Manager
posted inĀ Blogs and podcasts

[Blog Series] How to Design and Implement a Backup System Based on SLA Policies

Hello Community,Pretty much every week I have the same question, or comment, regarding how to create a Data Protection system that scales, it is flexible in terms of adding workloads, and dynamic so every business owner can add workloads without any difficulty.If we look at the diagram of what I just described, it could look like this, where a few Proxies are protecting an specific SLA, another three are protecting another a bit more aggressive SLA, and finally a physical Proxy is protecting the tier1 workloads using storage snapshots and SAN Backup Mode.We will make use of the flexibility and integration with VMware vSphere Tags, so we will need to create all of them under VMware, under one, or more categories, like this:On Veeam Backup & Replication they will look like this, so create a job with a name, then we add the desired tag:Selecting the Proxies we want, with the retention we want as well:And the schedule of course:Until you have something similar to this:Now, back to VMwa

4
eprieto
2 years ago
vNote42
vNote42Veeam Legend, Veeam Vanguard
posted inĀ Blogs and podcasts

[Quicktip] Failed Veeam Backup&Replication Upgrade

Recently I had problems by upgrading Veeam from 9.5U4 to v10. Upgrade process failed after a while. We found out, directory C:\Program Files\Veeam\Backup and Replication\Backup lost its permissions. We had no change any more to enter thisĀ directory.Ā Short answer: Antivirus software causes the problem. After disabling real-time scan, upgrade run without further issues. Antivirus software was configured according Veeam best practices.

5
vNote42
2 years ago
eprieto
eprietoVeeam Vanguard
posted inĀ Blogs and podcasts

Veeam Networking Port Tool for VBR v10 šŸ¤“

We continue exploring this powerfullĀ  siteĀ  Ā "Veeam Architects Site"In this topic,Ā I will show you how use this toolĀ Ā Veeam Networking Port Tool for VBR v10Ā Ā Ā DisclaimerThis tool uses the latest data from the Veeam User Guide. We encourage users to check the results with the user guide, consult a Veeam System Engineer or Solutions Architect..Ports numbers change, we cannot be held responisble for any changes within the Veeam Software which were made after the date shown below.This port designation is correct as of August 2020This tool was developed to simplify the identification of ports required by Veeam software. These need to be operational on your firewall between each component of Veeam Backup and Replication infrastructure when you choose to use themĀ How to use this toolĀ Prepare.Ā Know what servers you plan to use in the design and what you want to do with them, for example have a list of server names, IP addresses, and what Veeam roles you would like to use on each server. From a

6
Chris.Childerhose
1 year ago
haslund
haslundMr. VMCE
posted inĀ Blogs and podcasts

#DailyQuiz - #VMCE 2020 Scenario question 23 walkthrough

Todayā€™s #VMCE2020 #DailyQuiz walkthrough is ready.Ā How are you monitoring if RPO is being acheived today? What about RTO? Regular restore tests?Try this question and more atĀ https://rasmushaslund.com/vmce-practice-exam/

0
haslund
2 years ago
haslund
haslundMr. VMCE
posted inĀ Blogs and podcasts

#DailyQuiz - #VMCE 2020 Scenario question 22 walkthrough

Todayā€™s #VMCE2020 #DailyQuiz walkthrough is ready.Ā Do you have replication jobs leveraging a backup repository as a source? Which compression level do you use for off-site transfers?Try this question and more atĀ https://rasmushaslund.com/vmce-practice-exam/

2
haslund
2 years ago
Kseniya
KseniyaāœØ
posted inĀ Blogs and podcasts

FREE Veeam NFR Keys

If you are a certified IT pro, trainer or blogger,Ā Veeam is happy toĀ provide you with aĀ FREE NFR license (Not-For-Resale keys).This license allows forĀ non production use ofĀ VeeamĀ Availability SuiteĀ inĀ your home lab, without any feature limitations forĀ one year andĀ 20Ā workloadsĀ (VMs/Servers/Workstations) or ofĀ Veeam BackupĀ forĀ MicrosoftĀ OfficeĀ 365Ā inĀ your home lab without any feature limitations forĀ up toĀ 10Ā users.Here is a list of IT members eligible for a free Veeam NFR license key:Veeam Certified Engineers (VMCEs) AWS Heroes AWS Community Builders AWS Heroes AWS Certified Pros Google Cloud Developer Advocates VMware vExperts VMware Certified Professionals (VCPs) VMware Certified Advanced Professionals (VCAPs) Microsoft Most Valuable Professionals (MVPs) Microsoft Most Valuable Professionals - Office 365 (MVPs) Microsoft Certified Solutions Experts (MCSEs) VMware, Microsoft, AWS trainers And more!Free NFR for Veeam Availability SuiteĀ https://go.veeam.com/free-nfr-veeam-availability-su

36
Andanet
1 month ago
haslund
haslundMr. VMCE
posted inĀ Blogs and podcasts

#DailyQuiz - #VMCE 2020 Scenario question 21 walkthrough

Todayā€™s #VMCE2020 #DailyQuiz walkthrough is ready.Ā How proficient are you with the replication process on Hyper-V or vSphere? What is done by the source and target data movers?Try this question and more atĀ https://rasmushaslund.com/vmce-practice-exam/

1
eprieto
2 years ago
haslund
haslundMr. VMCE
posted inĀ Blogs and podcasts

#HomelabWednesday - How to install VMware vCenter Server updates from the GUI

In this week's episode of #HomelabWednesdays, I show how to see if any updates are available for your VMware vCenter Server and how to install the updates using the vSphere Appliance Management Interface (VAMI).Donā€™t forget to subscribe to get automatic notifications whenever a new video is released.Ā 

1
haslund
2 years ago
JMeixner
JMeixnerVeeam Legend
posted inĀ Blogs and podcasts

RMAN Plugin Backup - ORA-01012 Error

Yesterday I got an error for two oracle databases which are backed up via the VEEAM RMAN plugin.Strange - there are several database instances on this system, all but the two are working fine. And these two had worked up to then, tooā€¦Andā€¦ I did not change anything in the VEEAM and plugn configuraton Ā After some discussion and research with our Oracle admin - bingo.He had moved these two databases to another Home directory and did not change the corresponding entries in the /etc/oratab. So - as shown in the picture - the backup of the database and the recovery logs worked, but the creation of the AUTOBACKUP failed and the ORA-01012 error was given.After the entries were corrected all worked fine again.Perhaps some of you will face similar issues, too. I did not find anything for this problemin the forums with a quick search.

1
haslund
2 years ago
eprieto
eprietoVeeam Vanguard
posted inĀ Blogs and podcasts

Transport Modes on a chart šŸ‘

Applicability and efficiency of each transport mode primarily depends on the type of datastore used by the source host ā€” local or shared, and on the backup proxy type ā€” physical or virtual. The table below shows recommendations for installing the backup proxy, depending on the storage type and desired transport mode.which one do you use?Ā Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā  Ā Ā Ā Ā 

13
vNote42
2 years ago
haslund
haslundMr. VMCE
posted inĀ Blogs and podcasts

#DailyQuiz - #VMCE 2020 Scenario question 20 walkthrough

Todayā€™s #VMCE2020 #DailyQuiz walkthrough is ready.Ā Have you been in a legal situation that demanded an export of a specific point in time of your backups to ensure data is not compromised or lost? How did you handle it?Ā 

0
haslund
2 years ago
falkob
falkobVeeam Legend, Veeam Vanguard
posted inĀ Blogs and podcasts

Veeam Backup for Office 365 ā€“ Backing up single OneDrive folders

This is going to be a quick post on how to backup a single OneDrive folder with Veeam Backup for Office 365.One of my customers developed an internal policy regarding the usage of OneDrive for Business.The policy is, that each user has a specific ā€œWorkā€ folder (root folder) which gets backed up with Veeam Backup for Office 365. All other folders are not backed up and the users do know that. So in this scenario we needed a OneDrive backup job, which backs up the whole organization with the OneDrive object and only includes that work folder.By the way, you are also able to exclude specific OneDrive folders by using the ā€œ-ExcludedOneDriveFoldersā€ variable.However, in my case here it makes more sense to only include that specific folder.The scenarioI recreated that scenario with my own Office 365 Tenant, whereby I selected to only backup my webhosting folder. If you didnā€™t know it already, the ability to exclude or include specific folders for OneDrive backups is only available by using Po

1
eprieto
2 years ago
vmiss33
vmiss33Comes here often
posted inĀ Blogs and podcasts

#DRTestTuesday - Easily Schedule DR Tests with Veeam Availability Orchestrator

Did you know you can easily schedule your disaster recovery tests to run with Veeam Availability Orchestrator?Orchestratorā€™s Lab Calendar makes it simple to run a DR test on a scheduled basis whenever you want - like on #DRTestTuesday.The best part of course, is being able to provide a copy of a production environment to your application owners when after the test has run.Just think of what you can do with a copy of your data - test patches and application upgrades, train new staff members, and do all of the testing you would never want to do in a live environment.Be sure to check out how easy it is to do right in the Orchestrator documentation.If youā€™re looking for the ultimate deep dive on everything testing (including running a DR test on demand and scheduling one in the Lab Calendar) in Orchestrator, donā€™t miss this great webinarĀ which is nearly 100% demo (no boring PowerPoints from me!) andĀ tackles Orchestratorā€™s amazing dynamic documentation as well.Ā Ā As part of every DR test you

1
MicoolPaul
2 years ago
eprieto
eprietoVeeam Vanguard
posted inĀ Blogs and podcasts

Configuration Maximums šŸ› ļø - Best Practice Guide for Veeam Backup for Microsoft Office 365 šŸ˜Ž

In this Link https://bp.veeam.com/vbo/ you can find everything related to:Best Practice Guide for Veeam Backup for Microsoft Office 365This guide is intended to provide best practices for Veeam Backup for Microsoft Office 365. It is not meant as a full documentation or detailed explanation of features. Please refer to theĀ Veeam Help CenterĀ for this kind of documents.The best practice guide is inteded for professionals who search for a best practice answer to different topics. To allow deeper understanding of why we recommend specific best practices we add deeper information on the topics where applicable.Be aware that a best practice is not the only answer available. It will fit in the majority of cases but can also be totally wrong under different circumstances. Make sure you understand the implications of the advised best practices or ask someone who does. This time we will seeConfiguration MaximumsĀ This section covers the supported VBO configuration maximums. Numbers might vary depe

4
K
5 months ago
eprieto
eprietoVeeam Vanguard
posted inĀ Blogs and podcasts

Make Veeam designs online šŸ“

Many times I have had to do Veeam designs and this online site http://www.draw.io/Ā has helped me more than once !!It has Shapes from Veeam - VMware and many other Shapes, which will help you do what you need.Ā  We can import from these optionsĀ  Export in many formatsĀ  Or Save itĀ Ā 

7
regnor
2 years ago

Badge winners

Show all badges
Terms & Conditions