VeeamON 2024 - Use Code "COMMUNITY10" for 10% Off!
Hello Veeam community 🖐🏻I have a question regarding Backup Job Encryption and Backup Copy Job Encryption.What is the general advices on this.I have different encryption passwords for each Backup Job.The question is here, do I need to enable encryption for Backup Copy Job or it will use the original encryption that we already have configured on regular Backup Job’s.
Hello,I’m planning to implement now Backup Copy Jobs over WAN Accelerators.Our Upload/Download speed is around 850Mbps on both locations That should be High Bandwidth mode as I already did some research.Now I would like to have some advices from you guys:We have 7 Backup Jobs with total of 20 VMs all combined I will connect Secondary Storage (Synology RS3621xs+) to a VM directly with Ethernet Cable via iSCSI. It will be formatted as ReFS (64KB)I have following questions:Is one to one WAN Accelerator enough or I should implement 2 Source WAN Acceleratros to 1 Target WAN Accelerator What are you’re best practices for scheduling the Backup Copy Job? I used Immediate Copying in last Backup config As I don’t need Global Cache for High Bandiwidth mode, can someone explain how WAN Accelerators are working with High Bandwidth mode Our Largest VM is 13TB, if that is something that can be helpful with advices.
Hello,I would like to check with you guys if this performance is solid.I first created everything with WAN Accelerators that are physical machines with SSD, one for source and one for target side but it caused some problems and its not so convenient for me.Now I configured everything with Direct mode and I would like to see if this is a solid performance or not.Our connection on both locations are 1Gbps, around 750-850 Mbps upload/download speed.So this is from Primary Office to Secondary Office via VPN, 2 different countries.I have 3 BCJ, 1 is for 2 biggest VMs, and others are smaller ones.So the biggest VM is now left, all of the others are done but the Processing Rate is not so much to be honest, no other processes are running in the background.
Hello,I would like to know why are there so many differences in performance of BCJ?This is all in one BCJ.Result of already finished one: Results of currently running one:
Hello,We had 13 Backup Jobs that were all started in the same time period from 21:00 to 22:00.VBR server had 32 GB of RAM and 10 cores. It was a VM.All Backup Jobs were with single VM inside of it.Was this good approach or it was too much for our VBR Server to handle.We didn’t have any off-host Proxies and VBR Server and 60% of VMs were on the same Hyper-V host.It was acting then as only proxy for those jobs as I can assume.What would be the better approach on this?I’m still trying to grasp Veeam with his technologies as best I can..
Hello,How would my Backup copy Job chain look?Backup Jobs are 7 restore points (Incrementals + Synthetic Fulls)Backup Copy Jobs will also have 7 Restore points.As I’m going trough some old discussions I can see that with Forward incrementals and first Full Backup with backup copy jobs everything has stay above 7 restore points.Also one more question, do I need to seed backup copy jobs if I’m going to use WAN Acceleration in High Bandwidth Mode
Hello Forum,Since I’m reconstructing everything I would like to seek some advices for WAN accelerators.We have Primary Site (Austria, Vienna) and Secondary Site (Serbia, Novi Sad).Backup to Primary:Backup Jobs going to Synology LUN that is connected via iSCSI to Windows Server (ReFS 64KB block size) + FastClone From Monday to Friday - Incrementals On Friday - Full Synthetic Backup 21:00 - 22:00 starting of the Backup Jobs Backup to Secondary:I would like to try and implement WAN Accelerators for this so that potentially we have better performance. 2 Source WAN Accelerators. 1 for large VMs and 2 for small VMs 1 Target WAN Accelerator.Question regarding Backup Copy Job:As I’ve read some documentation about WAN Accelerators I checked that Source WAN Acc should have better CPU performance so it doesnt need to be some high I/O performance device and for Target WAN Acc is opposite, is thsi true? Plan is then to use physical Windows Machine with SSD on Target WAN Accelerator How would I appr
Hello, I wanted to be sure that fast clone is enabled but I can’t see it anywhere.As I remember on v11 it was written in the “Action” description.I’m using Synology NAS connected directly via iSCSI to the Windows Server 2022.It’s formatted as ReFS (64KB).You can see that it was a Synthetic Full but FastClone nowhere to be seen.
Hello Forum,I’m getting this weird error now: What could be a cause for this, two Backup Jobs finished successfully and now I get this error and its stuck.
Hello,I would need some general advices in creating Backup Copy Jobs.Is it okay to choose every Backup Job and insert it in the Backup Copy Job, as I can see there is no option to create in which order they will perform etc.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.