Quantum DXi V5000 integration with Veeam - Veeam Data Mover service is not enabled
Hi all,
I would like to use Quantum DXi V5000 as deduplication storage appliance
Unfortunately, when adding deduplication storage appliance, there is an error message, that there is no Veeam Data Mover service enabled on the virtual storage appliance
To enable Veeam Data Mover service I need to install Veeam Data Mover on the appliance…. The issue is that I do not know default root password for Quantum DXi V5000 and adding non-root user to sudoers file didnt help.
Is there any option to manually install Veeam Data Mover on linux based machine?
Page 1 / 1
Hi @GreenHenry - you need to enable the VDMS setting in the DXi V5000 here but it does require more RAM for the appliance though FYI.
Once you do this it will work with Veeam. I have it running at home in my lab. This is the setting for the Data Mover piece for Veeam.
My DXi V5000 unit I set up with - 4 vCPU and 24GB RAM by the way.
My DXi V5000 unit I set up with - 4 vCPU and 24GB RAM by the way.
Wow, why so many RAM?
My DXi V5000 unit I set up with - 4 vCPU and 24GB RAM by the way.
Wow, why so many RAM?
That option you need to turn on for Veeam requires 16GB or something like that.
My DXi V5000 unit I set up with - 4 vCPU and 24GB RAM by the way.
Wow, why so many RAM?
That option you need to turn on for Veeam requires 16GB or something like that.
Nice to know! I definitely need more RAM for my homelab.
Hi @Chris.Childerhose, thank you so much for an useful piece of advice!
However, I was googling quite a lot, I didnt realised I have to enable VDMS. Unfortunately, after enabling VDMS I am still strugling with an error - Installing Veeam Data Mover service Error: mkdir: cannot create directory '/opt/veeam/': Permission denied .
Indeed, I used the user, that I have created under VDMS settings. Moreover, I have added him to sudoers file. Althoug, for some reason ssh access is failing. On the other hand, I was trying to use other users as well, that were in sudoers file and ssh was possible, but still there is error regarding permissions
Were you facing the same issue when trying to use Quantum as Deduplication storage appliance withing Veeam?
Now, I see something even stranger. I have choosen right IP address of the appliance and I am sure VDMS is enabled, but Veeam thinks something different:
Be sure to also set up a share for NFS as well. It seems Veeam uses that when adding the appliance.
Hi @Chris.Childerhose, unfortunately, there is no option how to make my share being Veeam Data Mover enabled :-(
Have you joined Dxi V5000 to the workgroup or domain?
Nope, I have created NFS share because it is much easier in LAB environment
This should then connect to Veeam without issue. I can post back Friday with my configuration as I am at VeeamON this week.
@GreenHenry do you have joined Dxi to workgroup.
In quantum's guide has it create a cifs share.
Now, it seems, that Veeam transport services have been installed. Simply, I have changed rights on the folder /opt. There is only an issue with the certificate, but I think it is nothing relevant for adding deduplication appliance.. However, still I am facing the error message "Specified share is not Veeam Data Mover enabled"
Hi all, finally I have added Quantum DXiV5000 as deduplicating storage appliance into Veeam (as backup repository). First of all, it was needed to use the user "veeam" when choosing the appliance. Secondly, the default user "veeam" has to have ssh access allowed. In order to do that, I had to change config file (in /etc/ssh/sshd_config – PermitRootLogin yes). Then, it was possible to add Quantum DXiV5000 as deduplicating storage appliance. Thanks to all for your support and help!
Hi @GreenHenry - you need to enable the VDMS setting in the DXi V5000 here but it does require more RAM for the appliance though FYI.
Once you do this it will work with Veeam. I have it running at home in my lab. This is the setting for the Data Mover piece for Veeam.
Hi all
when I try to enable VDMS the issue is: “Failed to create VeeamGroup”
I’d like to know Where am I failing or what am I missing to configure?
regards,
Diego
Hi @GreenHenry - you need to enable the VDMS setting in the DXi V5000 here but it does require more RAM for the appliance though FYI.
Once you do this it will work with Veeam. I have it running at home in my lab. This is the setting for the Data Mover piece for Veeam.
Hi all
when I try to enable VDMS the issue is: “Failed to create VeeamGroup”
I’d like to know Where am I failing or what am I missing to configure?
regards,
Diego
Hi all,
Model: DXiV5000
SN: NSNE673E8B47D1E
Firmware: 99a17d73c (4.9.0)
Hi @GreenHenry - you need to enable the VDMS setting in the DXi V5000 here but it does require more RAM for the appliance though FYI.
Once you do this it will work with Veeam. I have it running at home in my lab. This is the setting for the Data Mover piece for Veeam.
Hi all
when I try to enable VDMS the issue is: “Failed to create VeeamGroup”
I’d like to know Where am I failing or what am I missing to configure?
regards,
Diego
Hi all,
Model: DXiV5000
SN: NSNE673E8B47D1E
Firmware: 99a17d73c (4.9.0)
This is not a support community so putting your appliance details is not necessary. Did you read over the thread and the solution?
Hi @GreenHenry - you need to enable the VDMS setting in the DXi V5000 here but it does require more RAM for the appliance though FYI.
Once you do this it will work with Veeam. I have it running at home in my lab. This is the setting for the Data Mover piece for Veeam.
Hi all
when I try to enable VDMS the issue is: “Failed to create VeeamGroup”
I’d like to know Where am I failing or what am I missing to configure?
regards,
Diego
Hi all,
Model: DXiV5000
SN: NSNE673E8B47D1E
Firmware: 99a17d73c (4.9.0)
Hi @GreenHenry - you need to enable the VDMS setting in the DXi V5000 here but it does require more RAM for the appliance though FYI.
Once you do this it will work with Veeam. I have it running at home in my lab. This is the setting for the Data Mover piece for Veeam.
Hi all
when I try to enable VDMS the issue is: “Failed to create VeeamGroup”
I’d like to know Where am I failing or what am I missing to configure?
regards,
Diego
Hi all,
Model: DXiV5000
SN: NSNE673E8B47D1E
Firmware: 99a17d73c (4.9.0)
System Version: 4.9.0 Build21 System Serial Number: NSNE673E8B47D1E Application Version: 4.9.0-99a17d73c Base OS Version: 4.9.0-33096506
@dfidalgo - we don’t need or require this information from you. Like I said this is not a support forum but rather a community website. Did you read the thread over and what the solution was? Pelase do this first.
@dfidalgo - we don’t need or require this information from you. Like I said this is not a support forum but rather a community website. Did you read the thread over and what the solution was? Pelase do this first.
Hi Chris, Actually, I don’t have root password in order to change /etc/ssh/sshd_config
@dfidalgo - we don’t need or require this information from you. Like I said this is not a support forum but rather a community website. Did you read the thread over and what the solution was? Pelase do this first.
Hi Chris, Actually, I don’t have root password in order to change /etc/ssh/sshd_config
Then you may need to contact Quantum Support to get this or see if they can assist. That is the way to fix the issue based on this thread.
