Skip to main content
Solved

Backup chain for Backup Copy Job

NemanjaJanicic
Forum|alt.badge.img+1

Hello,

How would my Backup copy Job chain look?
Backup Jobs are 7 restore points (Incrementals + Synthetic Fulls)

Backup Copy Jobs will also have 7 Restore points.

As I’m going trough some old discussions I can see that with Forward incrementals and first Full Backup with backup copy jobs everything has stay above 7 restore points.

Also one more question, do I need to seed backup copy jobs if I’m going to use WAN Acceleration in High Bandwidth Mode


 

Best answer by coolsport00

Hi @NemanjaJanicic - as I shared in your previous post, BCJ restore points are their own files. They do not resemble your source Backup job files. The first file of the BCJ will be a Full, then all subsequent files will be increments. That’s in the Guide I posted in your previous post, which is the same link Chris shared above.

I think you had a previous post also talking about WAN Accelerators for BCJs, and as stated there...High Bandwidth mode configured for source and target does not use global cache. No seeding is required there. 

Hope this helps.

View original
    Did this topic help you find an answer to your question?

    3 comments

    Chris.Childerhose
    Forum|alt.badge.img+21
    • Chris.Childerhose
    • Veeam Legend, Veeam Vanguard
    • 8449 comments
    • November 29, 2023

    You can see how the BCJ works from here - How Backup Copy Works - User Guide for VMware vSphere (veeam.com)

    Also, if you are using WAN Accelerators in the HB mode then you should not have to seed the backups.

    Chris Childerhose - VMCA2024 | VMCE2023 | VMCE-SP2024 | Veeam Vanguard 8* | Veeam Legend 5* | vExpert 6* | VCAP-DCV/VCP-DCV | Object First Ace | Cisco Champion | Twitter: @cchilderhose | Blog Site – https://just-virtualization.tech
    dloseke
    Moustafa_Hindawi
    2 people like this
    • dloseke
      dloseke
    • Moustafa_Hindawi
      Moustafa_Hindawi
    coolsport00
    Forum|alt.badge.img+20
    • coolsport00
    • Veeam Legend
    • 4133 comments
    • Answer
    • November 29, 2023

    Hi @NemanjaJanicic - as I shared in your previous post, BCJ restore points are their own files. They do not resemble your source Backup job files. The first file of the BCJ will be a Full, then all subsequent files will be increments. That’s in the Guide I posted in your previous post, which is the same link Chris shared above.

    I think you had a previous post also talking about WAN Accelerators for BCJs, and as stated there...High Bandwidth mode configured for source and target does not use global cache. No seeding is required there. 

    Hope this helps.

    Shane Williford - Veeam VMCA/VMCE | Veeam Legend | VUG Leader | VCP-DCV | Twitter: @coolsport00
    Chris.Childerhose
    dloseke
    2 people like this
    • Chris.Childerhose
      Chris.Childerhose
    • dloseke
      dloseke
    coolsport00
    Forum|alt.badge.img+20
    • coolsport00
    • Veeam Legend
    • 4133 comments
    • December 15, 2023

    Hi @NemanjaJanicic 😊 Again, just following up with this older post to see if there we helped answer your question? If not, please let us know.

    Best!

    Shane Williford - Veeam VMCA/VMCE | Veeam Legend | VUG Leader | VCP-DCV | Twitter: @coolsport00
    Chris.Childerhose
    1 person likes this
    • Chris.Childerhose
      Chris.Childerhose

    Comment


    Terms & Conditions