Veeam Infrastructure Appliance Configuration
Use tab to scroll and press Enter on Accept, to accept the EULA
Set a hostname and press Enter on Next
Press Enter on Static
Enter an IPv4 address, subnet mask, gateway and comma separated DNS servers, then press Enter on Apply
We can then test this with a ping test
When thats working, press Enter on Next
Optionally, press Enter on Edit to change the NTP server menu
Enter the NTP server and press Enter
You can use Add for additional NTP servers, if required, when you are happy, press Enter on Next
Enter a complex 15 character password, the same requirements as VBR, then press Enter on Next
Press Enter to show the QR code for MFA
You can press Enter to dismiss the QR code
Enter the code and press Enter on ok
Then press Enter on Next
Optionally, setup a security officer account, and press Enter on Next
When you are happy, press Enter on Finish
When its done, you will see a menu like this
Adding The Server To VBR
Log into VBR and click Managed Servers/Add Server
Click Veeam Infrastructure Appliance
Enter the FQDN and a description, then click Next
Click Yes to accept the TLS certificate
Click Next
Click Finish
I got some update sync issues, this looks to be from a GPG signing issue, so not sure why thats occurring, but if in doubt contact Veeam support
The full guide can be found here
https://blog.leaha.co.uk/2025/12/23/veeam-data-platform-13-ultimate-deployment-guide/