Skip to main content
  • EN

Hello everyone,

We have Veeam integrated with vCenter in our environment. There were no issues when adding the vCenter, but occasionally, the host discovery fails with the following error:

"Disks and volumes discovery failed. Error: A connection attempt failed because the connected party did not properly respond after a period of time, or the established connection failed because the connected host has failed to respond."

Environment details:

  • Backup Server OS: Windows Server 2022
  • vCenter Port: 442 is open
  • vCenter Version: 7.0.3

Has anyone faced this issue? Any suggestions on how to resolve it would be greatly appreciated!

Thanks in advance!

For the port do you mean 443 not 442 right?  If VBR cannot communicate to vCenter it can throw this message and can be a variety of things like network, traffic, being busy, etc.  It is one that is a “it depends” answer unfortunately.  If you edit the vCenter in VBR and go through the wizard that tends to fix it.

For the port do you mean 443 not 442 right?  If VBR cannot communicate to vCenter it can throw this message and can be a variety of things like network, traffic, being busy, etc.  It is one that is a “it depends” answer unfortunately.  If you edit the vCenter in VBR and go through the wizard that tends to fix it.

Hello Chris,

Yes, the port is 443. I’ve tried using the wizard, and it works only at that time but fails most of the time. On 10 Host discovery job only 2 successes, remaining fails

Here are the repeated errors I found in the debug logs at:

C:\ProgramData\Veeam\Backup\Utils\Util.VolumesHostDiscover.log

d17.11.2024 03:07:21.918]    <17>   Error (3)    Failed to resolve IPs of omni.cube.io
i17.11.2024 03:07:21.918]    <17>   Error (3)    Failed to resolve name: omni.cube.io. Error: This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server.  (Veeam.Backup.Common.CCppComponentException)
o17.11.2024 03:07:21.918]    <17>   Error (3)    Agent failed to process method {Network.ResolveHostName}. (Veeam.Backup.Common.CCppComponentException)

Hi ​@sangeetha -

Is your DNS records set up ok?

Hi ​@sangeetha -

Is your DNS records set up ok?

This is what I would check next is DNS as Shane points out.  If you cannot resolve IP > Hostname and vice versa you will need to look at the hosts file.

​@coolsport00 , ​@Chris.Childerhose - DNS records are OK

Well ​@sangeetha ...there appears to be some connection issue between your VBR server and vCenter. Firewall, ports, network, Windows UAC are all things to look for here. Do you have individual ESXi Hosts added or just vCenter? You don’t need individual Hosts if you add vCenter.

​@coolsport00 , ​@Chris.Childerhose - DNS records are OK

So you can ping the IP and get a DNS FQDN back and vice versa?  If one or the other does not work then it is not working properly.

Comment


Terms & Conditions