Discussion Boards

I was trying to configure a VBR location profile for my OpenShift cluster, but it says ‘Repository not found’.When I runcurl -v -k -u Administrator:<password> https://<vbr-ip>:9419/api/v1/repositories, it doesn’t return any value.

Hi Community,  I just keep getting this error on one of my esxii and I am stuck in here. we already tried to troubleshoot the esxii by restarting every servicies and the esxii itself but it is not working. We have 3 other esxii that are just working fine but this one just show this error.NB: We gave an account with max privilege to try the backup Error: Failed to open VDDK disk [[Datastore_DELL_PowerEdge_120] VM-DNS1/VM-DNS1-1-000001.vmdk] ( is read-only mode - [true] ) Logon attempt with parameters [VC/ESX: [192.168.1.170];Port: 443;Login: [xxx];VMX Spec: [moref=vm-32];Snapshot mor: [snapshot-135];Transports: [nbd];Read Only: [true]] failed because of the following errors: Failed to open disk for read. Failed to upload disk 'vddkConnSpec>' Agent failed to process method {DataTransfer.SyncDisk}.

Hi,I have a few backups running to a Repository on an NAS, shared by nfs3://[IP ADDX]/Backups/etc…It works fine for my esxi backups. I’m trying too backup a hyper-V VM and and getting the below message. It does succeed in creating as folder in the repository for the packup to go, and the permissions are are same as the others, so I’m not sure what credentials its trying to use since it’s writing to the same place that works for other backup jobs:“… Processing … Error: Failed to reset previous connection exception: Permission deniedFailed to open storage for read/write access. Storage: [target path] ....Agent failed to process method {Stg.OpenReadWrite}.  “I’m not sure if this means it can’t read the source or can’t write the target. If the former, what do I have to do because use a local admin to access the source? If the letter, why can this job not write to the repository when other jobs can?Thanks, 

Hello everyone,I am new to this community and have already tried my luck in a closed thread about the Veeam VM Migrator Utility.However, I currently have a question about this utility.Are there any experience reports on migrating individual vSphere VMs using the Migrator Utility?Is individual migration with this tool even intended? Thank you in advance for your feedback!

i have vbr 12.3 installed on VM from where i had to add storeonce vsa ,however when i add username and password,it shows error saying unable to login to ip:port 16022...what could be the reason

Hi Community,Has anyone successfully reverted Veeam ONE from version 13 to version 12? Are there recommended steps or considerations to avoid issues during the downgrade? Any official guidance or lessons learned would be greatly appreciated.

Since yesterday all our existing configured backup jobs to Azure Blob storage are failing and attempts to create new object storage repository are failing on Validating Credentials.  Error: Unable to access object storage (reason: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. (xstorageaccountnamex.blob.core.windows.net:443))Any ideas?  I’ve tried rotating the access key in Azure and updating that in the Cloud account in Veeam m365 backup.  This has started to occur a week after upgrading to v8 which was ok initially.

I have installed Veeam Software Appliance on fresh hardware. My intent is to recreate my backup infrastructure around it and then deprecate my current Windows server that handles the jobs. I am not finding anywhere to download a license key for version 13. It does not show in my account portal as an option for generating a key.

I have been (legally) ordered to provide “any and all” copies of backups for a client dating back two years. Veeam 8.1.2 Community runs on a Win10 Virtual Machine and runs 3 routines dailyExchange, SharePoint + Teams, OneDriveManual restore will take a year and $9K of external USB hard drives.Wondering if there is a way to give them a copy of the Veeam virtual machine with backups disabled and the only restore options are save locally. I do not want them to accidentally trigger a restore job that overwrites the live data.Disabling the 3 jobs is not appealing because they can be enabled easily.I changed the global admin password associated with the organization but did not affect Veeam operation.  This would allow us to continue to the original Veeam backup server for daily backups.In typing this, it seems that providing them with a searchable and restorable archive is what I am looking for.  Plus it cannot interfere with the ongoing backup of the live data.I am grateful for any suggest

2025-11-06 Subject: VBR 12.3.2.4165 Installation Failure Version provider was not found in suite context on Windows 11 Pro ARM ParallelsHello,I am attempting a fresh installation of Veeam Backup & Replication Community Edition (ISO: 12.3.2.4165) on a newly created virtual machine, but the Veeam Setup Engine consistently fails with the error: An error has occurred: Version provider was not found in suite context.Environment Details: My host is a MacBook Air running macOS Tahoe 26.1 and I am using Parallels Desktop 26 for Mac. The guest operating system is Windows 11 Pro, Version 25H2. The system type is a 64-bit operating system with an ARM-based processor. The ARM architecture may be a factor in the installer's execution checks.Troubleshooting Steps Completed:I have tried running Setup.exe as administrator, unblocked the ISO file in its Properties, and also extracted the entire ISO contents to a local folder and tried the setup again.I have confirmed that .NET Framework 4.8.1 or la

Hi, my backup is showing this error, can someone please help me? Both machines are VMs in Hyper-V.  

I read in the news recently that Veeam has bought Securiti AI, which is going to have a direct impact on its data protection offering. This deal is a game-changer for Veeam's strategy, combining data resilience with data security.But what does Securiti AI do, and why did Veeam decide to buy it?Securiti AI is a big name in the industry, and they focus on Data Security Posture Management (DSPM), privacy and data governance. With a spent about £1.725 billion in total Veeam's big plan is to bring together their data resilience (which they're really good at – backup and recovery) with data security (Securiti AI's thing).So, why's this important for Veeam?I think this purchase is meant to create one command centre where they can use DSPM on data in use and on backup files as well. This means that sensitive data (PII, GDPR-compliant data) can be easily identified in backups, and the compliance and security posture of the backup data itself can also be verified.So not only can customers restor

 "Failed to establish connection: no valid IP addresses were found. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 10.x.x.x:10005"The problem here is my Veeam VM is not on that network. It is only home network 192.x.x.x using  hyper-v switch.  The network referenced in the error strictly a closed vlan for security cams which is a secondary nic on the host server.  The host server and domain controller backup fine but the win11 clients Veeam keeps trying to use secondary nic which is not connected to the vm. AD DNS does not have any enters for the other network.  so somehow it Veeam is trying to use the host server nics at will.I have set the global traffic preferred network to the home network. makes non difference disabled all firewalls on all devices not joy same error.  my only other thought would be to force all the firewall rules to a scope for th

I back up our Organization sites nightly. Sometimes I get a warning on a job that a site was deleted and I have to go into the job and remove the deleted site from the backup. Is there any way for deleted sites to just be removed from the backup automatically? So the program is only backing up what exists?  Note that currently ‘select objects to back up’ is set to ‘back up the following objects’ which is 23 of 25 sites. So I don’t have ‘Back up entire organization’ selected. Although would that maybe be my fix and dynamically adjust what sites are available to back up? 

We use paid Veeam B&R v12.x (VUL/Essentials) to back up NetApp ONTAP SMB/NFS to a local repo and are evaluating off-site immutable copies via SOBR + S3/Wasabi/Azure (Object Lock) vs Cloud Connect (VCSP). What’s your real-world take on job layout (per-share vs per-volume), snapshots, NAS proxies, performance and €/TB/month, plus restore/ACL fidelity, cross-protocol restores, and immutability/lifecycle gotchas? Any proven tuning or pitfalls to avoid?